We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver 1U rack server, eight 2.5-inch drive bays front, dual power supplies rear

DELL

DELL PowerEdge R630 8SFF 2x Xeon E5-2680 v3 384GB DDR4 No Drive

SKU CH-X7DF-58466

A 1U rack server with dual 12-core Xeon processors, 384 GB DDR4 ECC memory, PERC H730 SAS RAID controller, and eight 2.5-inch drive bays ready for your storage configuration

  • TypeRack
  • CPU TypeIntel Xeon
  • CPU Speed2.5GHz
  • # of Processors Installed2
  • MAX Processors2
  • Installed Memory Size384GB
  • Dual 12-core Xeon processors handle heavy workloads
  • 384GB DDR4 ECC memory supports large datasets
  • PERC H730 RAID controller manages SAS storage
  • iDRAC8 Enterprise enables remote server management
  • 8-bay 2.5-inch chassis fits dense rack deployments

Dell PowerEdge R630 dual Xeon server

The Dell PowerEdge R630 is a 1U rack-mount server fitted with two Intel Xeon E5-2680 v3 processors running at 2.5GHz and 384GB of DDR4 ECC registered memory. It uses a PERC H730 SAS RAID controller and supports up to eight 2.5-inch drive bays. Remote management is provided by iDRAC8 with an Enterprise licence.

Suits virtualisation hosts needing high core count

Buyers who need more than 1.5TB of memory or more than two sockets should look elsewhere. The 24-core total and 384GB installed suit dense VM workloads, but the chassis cannot accept a third processor.

Single specification that decides fit

The server ships with no drives installed, so storage capacity and performance depend entirely on the SAS drives you add. The PERC H730 controller manages the RAID array, but without drives the system cannot boot an operating system.

Highlights

  • Dual 12-core Xeon processors handle heavy workloads
  • 384GB DDR4 ECC memory supports large datasets
  • PERC H730 RAID controller manages SAS storage
  • iDRAC8 Enterprise enables remote server management
  • 8-bay 2.5-inch chassis fits dense rack deployments

Specifications

BrandDELL
SeriesPowerEdge
ModelRack Mount
TypeRack
CPU TypeIntel Xeon
CPU Speed2.5GHz
# of Processors Installed2
MAX Processors2
Installed Memory Size384GB
Memory TypeDDR4
Max Memory Capacity1.5TB
Hard Drive (Installed)7,20
Storage ControllerDell PERC H730 SAS Controller
HDD InterfaceSAS
GPU TypeIntegrated Graphics
Remote ManagementiDRAC8 - Enterprise License
Dimensions36 x 24 x 10 in
Weight40

Questions about this item

What drive bays and controller are needed to add storage to the R630 8SFF?

The 8SFF chassis has eight 2.5-inch bays and a PERC H730 SAS RAID controller installed.

Will the existing Intel I350 and X540 network adapters work with older 1 GbE switches?

Yes, the X540 10 GbE and I350 1 GbE ports both auto-negotiate down to 1 GbE for legacy switch compatibility.

How can I confirm the 384 GB DDR4 ECC memory is fully recognised after installation?

Check the iDRAC8 Enterprise dashboard or POST memory count; both should show 384 GB with zero correctable errors.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.