DELL
DELL PowerEdge R640 4LFF 2x Xeon Silver 4214 64GB DDR4 No Drive
A 1U rack server with two 12-core Xeon Silver 4214 CPUs at 2.2GHz, 64GB DDR4 ECC memory, a PERC H740P RAID controller and four 3.5-inch SATA drive bays, sold without drives
- TypeRack
- CPU TypeIntel Xeon
- CPU Speed2.2GHz
- # of Processors Installed2
- MAX Processors2
- Installed Memory Size64GB
- Dual Xeon Silver 4214 CPUs deliver 24 cores at 2.2GHz
- 64GB DDR4 ECC memory supports heavy virtualisation workloads
- PERC H740P RAID controller manages up to four 3.5" SATA drives
- iDRAC9 Enterprise licence enables full remote server management
- 10GbE 562T dual-port adapter provides high-speed network connectivity
Dual-socket Xeon Silver 4214 server with 64GB DDR4
This Dell PowerEdge R640 arrives with two Intel Xeon Silver 4214 processors running at 2.2GHz and 64GB of DDR4 ECC registered memory. The chassis provides four 3.5-inch drive bays and a PERC H740P RAID controller. Integrated graphics and a 10GbE two-port 562T adapter handle video and network duties. Dual 750W power supplies and iDRAC9 Enterprise remote management are included.
Suits virtualisation hosts needing licensed remote
Buyers who want a ready-to-run virtualisation platform with hardware RAID and out-of-band control will find the PERC H740P and iDRAC9 Enterprise licence valuable. Organisations that require drives installed from the factory should look elsewhere, as no storage devices ship with this unit. Workloads demanding GPU acceleration or more than two sockets are not supported by this configuration.
Four 3.5-inch bays define the storage ceiling
The R640 4LFF chassis accepts up to four 3.5-inch SATA drives connected to the PERC H740P controller, so total raw capacity is limited by the number and size of drives you add. Memory can scale to 7.68TB of DDR4 across the available slots, but the drive-bay count is fixed at four.
Highlights
- Dual Xeon Silver 4214 CPUs deliver 24 cores at 2.2GHz
- 64GB DDR4 ECC memory supports heavy virtualisation workloads
- PERC H740P RAID controller manages up to four 3.5" SATA drives
- iDRAC9 Enterprise licence enables full remote server management
- 10GbE 562T dual-port adapter provides high-speed network connectivity
Specifications
| Brand | DELL |
|---|---|
| Series | PowerEdge |
| Model | Rack Mount |
| Type | Rack |
| CPU Type | Intel Xeon |
| CPU Speed | 2.2GHz |
| # of Processors Installed | 2 |
| MAX Processors | 2 |
| Installed Memory Size | 64GB |
| Memory Type | DDR4 |
| Max Memory Capacity | 7.68TB |
| Hard Drive (Installed) | 6,00 |
| Storage Controller | Dell PERC H740P Controller |
| HDD Interface | SATA |
| GPU Type | Integrated Graphics |
| Remote Management | iDRAC9 - Enterprise License |
| Dimensions | 36 x 24 x 10 in |
| Weight | 40 |
Questions about this item
What DDR4 memory type and speed do I need to expand the installed 64 GB?
The system uses DDR4 ECC registered DIMMs; match the existing modules and populate the remaining slots up to the 7.68 TB maximum.
Can I keep using my existing SATA drives with the PERC H740P controller?
Yes, the controller supports SATA drives in the four 3.5-inch bays and manages them through its RAID firmware.
How do I verify the iDRAC9 Enterprise licence is active after first boot?
Log into the iDRAC web interface; the dashboard shows the licence status and confirms the enterprise features are enabled.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



