DELL
DELL PowerEdge R640 4LFF Xeon Gold 6226R 128GB DDR4 No Drive Rack Server
A 1U rack server with one Xeon Gold 6226R at 2.9 GHz, 128 GB DDR4, a PERC H740P controller and four 3.5-inch bays
- TypeRack
- CPU TypeIntel Xeon
- CPU Speed2.9 GHz
- # of Processors Installed1
- MAX Processors2
- Installed Memory Size128GB
- 16-core Xeon Gold 6226R at 2.9 GHz for demanding workloads
- 128 GB DDR4 ECC memory supports large datasets and virtualization
- PERC H740P RAID controller protects data with hardware acceleration
- Four 3.5-inch drive bays allow flexible SATA storage expansion
- iDRAC9 Enterprise remote management simplifies server administration
Dell PowerEdge R640 4LFF Server
The Dell PowerEdge R640 is a 1U rackmount server system built for dense compute workloads. It ships with one Intel Xeon Gold 6226R processor running at 2.9 GHz with sixteen cores and twenty-two megabytes of cache. One hundred twenty-eight gigabytes of DDR4 ECC registered memory are installed, and the chassis supports up to four 3.5-inch SATA drive bays. A PERC H740P RAID controller and dual 750 W power supplies are included.
Suits virtualisation hosts needing core density
This configuration suits virtualisation hosts, database nodes or hyper-converged clusters that benefit from sixteen cores and large DDR4 capacity. The single-socket layout leaves a second processor socket open for future expansion up to the two-socket maximum. Buyers who need more than four 3.5-inch drive bays, discrete GPU acceleration or a different drive interface should evaluate alternative chassis designs.
Four 3.5-inch SATA bays with PERC H740P RAID
The defining specification is the four-bay 3.5-inch SATA backplane paired with the PERC H740P hardware RAID controller. This combination determines how many spinning drives or SATA SSDs you can install internally and which RAID levels are supported. No drives are installed, so you must add compatible SATA media before deployment.
Highlights
- 16-core Xeon Gold 6226R at 2.9 GHz for demanding workloads
- 128 GB DDR4 ECC memory supports large datasets and virtualization
- PERC H740P RAID controller protects data with hardware acceleration
- Four 3.5-inch drive bays allow flexible SATA storage expansion
- iDRAC9 Enterprise remote management simplifies server administration
Specifications
| Brand | DELL |
|---|---|
| Series | PowerEdge |
| Model | Rack Mount |
| Type | Rack |
| CPU Type | Intel Xeon |
| CPU Speed | 2.9 GHz |
| # of Processors Installed | 1 |
| MAX Processors | 2 |
| Installed Memory Size | 128GB |
| Memory Type | DDR4 |
| Max Memory Capacity | 7.68TB |
| Hard Drive (Installed) | 8,00 |
| Storage Controller | Dell PERC H740P Controller |
| HDD Interface | SATA |
| GPU Type | Integrated Graphics |
| Remote Management | iDRAC9 - Enterprise License |
| Dimensions | 36 x 24 x 10 in |
| Weight | 40 |
Questions about this item
Does this server need a specific rack width and depth to fit the 36 x 24 x 10 in chassis?
The unit is 36 inches wide, 24 inches deep and 10 inches high, so a rack with at least that much clear width and depth is required.
Can I keep using my existing 3.5-inch SATA drives with the PERC H740P controller?
Yes, the chassis supports up to four 3.5-inch drives and the PERC H740P controller connects to SATA drives.
How can I confirm the iDRAC9 Enterprise license is active after the firmware update?
Log into the iDRAC web interface or use the racadm command line; the license status page will show Enterprise as the active tier.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



