DELL
DELL PowerEdge R640 4x3.5" 2x Xeon Silver 4110 128GB DDR4 No Drive
A 1U rack server with dual 2.1GHz Xeon Silver 4110 CPUs, 128GB DDR4 ECC memory, PERC H740P RAID controller and four 3.5" SATA bays ready for custom storage
- TypeRack
- CPU TypeIntel Xeon
- CPU Speed2.1GHz
- # of Processors Installed2
- MAX Processors2
- Installed Memory Size128GB
- Dual Xeon Silver 4110 CPUs deliver 16 cores at 2.1GHz
- 128GB DDR4 ECC registered memory supports demanding workloads
- PERC H740P RAID controller manages up to four 3.5" SATA drives
- iDRAC9 Enterprise licence enables full remote server management
- 10GbE 562T dual-port adapter provides high-speed network connectivity
Ready-to-configure 1U server
The Dell PowerEdge R640 is a 1U rack-mount server system built for organisations that need a pre-validated platform. It arrives with two Intel Xeon Silver 4110 processors running at 2.1 GHz and 128 GB of DDR4 ECC registered memory already installed. The chassis supports up to four 3.5-inch SATA drive bays and includes a PERC H740P RAID controller. Remote management is handled by iDRAC9 with an Enterprise licence.
Teams that need a tested foundation
This configuration suits IT teams that want a fully tested, firmware-current server they can populate with their own storage and expand to 7.68 TB of memory later. The dual 750 W power supplies and 10 GbE 562T adapter are fitted, so the hardware is ready for virtualisation or database workloads. Buyers who require drives, GPU accelerators or a different processor generation should look at other chassis options.
Controller and management included
The PERC H740P RAID controller provides hardware RAID for the SATA bays you populate, removing the need for a separate card purchase. The iDRAC9 Enterprise licence enables full remote console, power control and hardware inventory without an extra subscription. A rail kit is available on request to simplify rack installation.
Highlights
- Dual Xeon Silver 4110 CPUs deliver 16 cores at 2.1GHz
- 128GB DDR4 ECC registered memory supports demanding workloads
- PERC H740P RAID controller manages up to four 3.5" SATA drives
- iDRAC9 Enterprise licence enables full remote server management
- 10GbE 562T dual-port adapter provides high-speed network connectivity
Specifications
| Brand | DELL |
|---|---|
| Series | PowerEdge |
| Model | Rack Mount |
| Type | Rack |
| CPU Type | Intel Xeon |
| CPU Speed | 2.1GHz |
| # of Processors Installed | 2 |
| MAX Processors | 2 |
| Installed Memory Size | 128GB |
| Memory Type | DDR4 |
| Max Memory Capacity | 7.68TB |
| Hard Drive (Installed) | 16,00 |
| Storage Controller | Dell PERC H740P Controller |
| HDD Interface | SATA |
| GPU Type | Integrated Graphics |
| Remote Management | iDRAC9 - Enterprise License |
| Dimensions | 36 x 24 x 10 in |
| Weight | 40 |
Questions about this item
What power supplies must I already have to run the two Xeon Silver 4110 CPUs and the PERC H740P controller?
The chassis ships with two 750 W units, so no additional power supplies are required for the installed components.
Can I keep my existing 3.5-inch SATA drives and use them in the four drive bays?
Yes, the four 3.5-inch bays accept SATA drives and the PERC H740P controller manages them in RAID or non-RAID mode.
How do I confirm the iDRAC9 Enterprise remote management is active after first boot?
Connect the management port, log into the iDRAC web interface and verify the license shows Enterprise with the latest firmware version.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



