We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

DELL

DELL PowerEdge R730 2U Rack Server 2x Xeon E5-2640 v3 2.6GHz 8 Core 128GB DDR4 H730 8x 2.5" Trays

SKU CH-5DDR-PKND4

Dual-processor 2U rack server with 128 GB DDR4 ECC memory, PERC H730 RAID controller, eight 2.5-inch drive bays, quad-port 1/10 GbE networking and redundant 750 W power supplies

  • TypeRack
  • Rack Height2U
  • Redundant Hot-swap PowerYes
  • CPU TypeIntel Xeon
  • CPU Speed2.60 GHz
  • CPU SocketLGA 2011-3
  • Dual Xeon E5-2640 v3 CPUs deliver 16 cores at 2.6GHz
  • 128GB DDR4 2133MHz ECC memory supports virtualization workloads
  • PERC H730 1GB controller enables RAID 0/1/5/6/10/50/60
  • Eight 2.5" SAS/SATA drive bays provide flexible storage capacity
  • Dual 750W platinum PSUs with iDRAC8 Enterprise ensure uptime

2U rack server with dual Xeon processors

The Dell PowerEdge R730 is a 2U rack server built for midsize and large enterprise workloads. It ships with two Intel Xeon E5-2640 v3 processors, each running at 2.6 GHz with eight cores and a 3.4 GHz turbo frequency. The system includes 128 GB of DDR4 registered ECC memory across eight 16 GB modules and a PERC H730 storage controller with 1 GB cache.

Suits virtualisation and database clusters.

This configuration suits organisations deploying virtualisation hosts, database clusters or VDI environments that benefit from sixteen cores and large memory capacity with room to grow to 1.5 TB. The eight 2.5-inch SAS/SATA drive trays support hard drives only, so buyers needing all-flash arrays or GPU-accelerated workloads should evaluate other platforms.

PERC H730 controller with RAID 0/1/5/6/10/50/60

The PERC H730 controller provides hardware RAID across all supported levels including RAID 0, 1, 5, 6, 10, 50 and 60 plus pass-through mode. It manages the eight internal drive bays using SAS or SATA interfaces and includes a battery-backed cache for data protection during power loss. This single component determines whether the storage topology matches your redundancy and performance requirements.

Highlights

  • Dual Xeon E5-2640 v3 CPUs deliver 16 cores at 2.6GHz
  • 128GB DDR4 2133MHz ECC memory supports virtualization workloads
  • PERC H730 1GB controller enables RAID 0/1/5/6/10/50/60
  • Eight 2.5" SAS/SATA drive bays provide flexible storage capacity
  • Dual 750W platinum PSUs with iDRAC8 Enterprise ensure uptime

Specifications

BrandDELL
SeriesPowerEdge R730
ModelR730
TypeRack
Rack Height2U
Redundant Hot-swap PowerYes
CPU TypeIntel Xeon
CPU Speed2.60 GHz
CPU SocketLGA 2011-3
Number of CPU Cores8-Core Processor
# of Processors Installed2
MAX Processors2
ChipsetIntel C610
Installed Memory Size128GB
Memory TypeDDR4
Max Memory Capacity1.5TB
Number of Memory Slots24
Storage ControllerDell Perc H730 1GB Controller
HDD InterfaceSATA/SAS
SSD (Installed)No
Raid LevelRAID 0/1/5/6/10/50/60
GPU TypeMatrox G200
Video Memory8MB
Ethernet ControllerDell Intel X520/I350 Quad Port 2x 1GbE 2x 10Gb SFP+ Network Daughter Card
LAN Ports4 x Ports
Expansion Slots1 x PCIe 3.0 x16 Slot, Single Riser Included (Riser 3)
Management PortRJ 45
Operating SystemNo
Features8 x 2.5" SATA/SAS Hot-Plug Drive Bays

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will the 128 GB DDR4 installed across 24 slots handle sustained compute loads?

The server ships with 128 GB DDR4 in eight 16 GB modules leaving sixteen empty slots for expansion up to 1.5 TB.

How much heat and power draw should I expect from dual Xeon E5-2640 v3 CPUs and two 750 W PSUs running continuously?

Dual 8-core Xeon E5-2640 v3 processors at 2.6 GHz with 3.4 GHz turbo draw significant power under full load, cooled by redundant 750 W platinum power supplies.

Which storage drives and networking modules must I supply to make the H730 controller and X520/I350 card operational?

You need 2.5-inch SAS or SATA drives for the eight trays and SFP+ transceivers for the two 10 GbE ports on the X520/I350 daughter card.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.