DELL
DELL PowerEdge R730 2x Xeon E5-2603 v3 1.6GHz 768GB DDR4 8LFF
Rack server with dual Xeon E5-2603 v3 processors, 768 GB DDR4 memory, eight 3.5-inch drive bays and PERC H730 SAS controller
- TypeRack
- CPU TypeIntel Xeon
- CPU Speed1.6GHz
- # of Processors Installed2
- MAX Processors2
- Installed Memory Size768GB
- Dual Xeon E5-2603 v3 CPUs deliver 12 total cores for multi-threaded workloads
- 768GB DDR4 ECC memory supports large datasets and virtualisation
- PERC H730 SAS controller enables hardware RAID across eight 3.5" drive bays
- iDRAC8 Enterprise licence provides full remote management and monitoring
- Dual 495W power supplies ensure redundancy for continuous operation
Dell PowerEdge R730 2×Xeon E5-2603 v3 768GB DDR4
This Dell PowerEdge R730 server system arrives new with dual Intel Xeon E5-2603 v3 processors running at 1.6GHz. It is populated with 768GB of DDR4 memory, reaching the maximum supported capacity. The 8LFF chassis supports up to eight 3.5-inch drives via a PERC H730 SAS controller with SATA interface. Remote management is provided by iDRAC8 Enterprise.
Suits virtualisation hosts
Buyers who need more than eight drive bays should look elsewhere. Organisations requiring a different processor core count or clock speed must choose another platform. The integrated graphics and 10GbE plus 1GbE networking are fixed configurations. This unit ships without drives installed.
Memory fixed at 768GB DDR4 maximum capacity
The installed 768GB matches the system limit, so no further memory expansion is possible. Two processors are already installed in the two available sockets. Storage capacity depends entirely on the drives you add to the eight 3.5-inch bays. Power is supplied by dual 495W units.
Highlights
- Dual Xeon E5-2603 v3 CPUs deliver 12 total cores for multi-threaded workloads
- 768GB DDR4 ECC memory supports large datasets and virtualisation
- PERC H730 SAS controller enables hardware RAID across eight 3.5" drive bays
- iDRAC8 Enterprise licence provides full remote management and monitoring
- Dual 495W power supplies ensure redundancy for continuous operation
Specifications
| Brand | DELL |
|---|---|
| Series | PowerEdge |
| Model | Rack Mount |
| Type | Rack |
| CPU Type | Intel Xeon |
| CPU Speed | 1.6GHz |
| # of Processors Installed | 2 |
| MAX Processors | 2 |
| Installed Memory Size | 768GB |
| Memory Type | DDR4 |
| Max Memory Capacity | 768GB |
| Hard Drive (Installed) | 40,00 |
| Storage Controller | Dell PERC H730 SAS Controller |
| HDD Interface | SATA |
| GPU Type | Integrated Graphics |
| Remote Management | iDRAC8 - Enterprise License |
| Dimensions | 36 x 24 x 10 in |
| Weight | 40 |
Questions about this item
How much rack depth does the 36 x 24 x 10 in chassis require?
The server measures 36 inches deep, so allow at least that much usable rail depth plus cable clearance behind the rear panel.
Which screws secure the PERC H730 RAID controller to the motherboard?
The H730 plugs into the dedicated internal storage slot and is held by the single retention screw on the card bracket.
When should the 495 W power supplies be replaced?
Replace a unit if iDRAC8 reports a fault LED, the supply fails self-test, or the server logs a redundant-power-lost event.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
