We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

DELL

DELL PowerEdge R730 2x Xeon E5-2650L v3 384GB DDR4 8LFF

SKU CH-HZXT-EZTXX

A 2U rack server with dual 12-core Xeon processors at 1.8 GHz, 384 GB DDR4 ECC memory, PERC H730 SAS controller and eight 3.5-inch drive bays

  • TypeRack
  • CPU TypeIntel Xeon
  • CPU Speed1.8GHz
  • # of Processors Installed2
  • MAX Processors2
  • Installed Memory Size384GB
  • Dual 12-core Xeon CPUs at 1.8 GHz deliver high multi-thread throughput
  • 384 GB DDR4 ECC memory supports large virtualisation workloads
  • Eight 3.5-inch drive bays with PERC H730 RAID controller enable flexible storage
  • iDRAC8 Enterprise remote management allows full out-of-band server control
  • Dual 495 W power supplies provide redundancy for continuous operation

Built for dense storage workloads

The Dell PowerEdge R730 in its 8 LFF chassis holds up to eight 3.5-inch drives and ships with two Xeon E5-2650L v3 processors running at 1.8 GHz. A PERC H730 SAS controller manages the backplane, while 384 GB of DDR4 ECC registered memory fills half the 768 GB maximum. Dual 495 W supplies and iDRAC8 Enterprise complete a platform sized for capacity-heavy tasks.

Suits buyers who need maximum 3.5-inch bay count

This configuration targets archives, backup targets and media libraries that benefit from eight large-form-factor slots and an Intel I350/X540 quad-port card. Builders who require 2.5-inch density, more than two sockets, or a newer processor generation should evaluate other platforms.

The eight 3.5-inch drive bay limit decides fit

With a hard ceiling of eight LFF bays and a PERC H730 RAID controller, the chassis cannot accept additional internal disks beyond that count. Confirm the required raw capacity fits inside eight bays before ordering.

Highlights

  • Dual 12-core Xeon CPUs at 1.8 GHz deliver high multi-thread throughput
  • 384 GB DDR4 ECC memory supports large virtualisation workloads
  • Eight 3.5-inch drive bays with PERC H730 RAID controller enable flexible storage
  • iDRAC8 Enterprise remote management allows full out-of-band server control
  • Dual 495 W power supplies provide redundancy for continuous operation

Specifications

BrandDELL
SeriesPowerEdge
ModelRack Mount
TypeRack
CPU TypeIntel Xeon
CPU Speed1.8GHz
# of Processors Installed2
MAX Processors2
Installed Memory Size384GB
Memory TypeDDR4
Max Memory Capacity768GB
Hard Drive (Installed)32,00
Storage ControllerDell PERC H730 SAS Controller
HDD InterfaceSATA
GPU TypeIntegrated Graphics
Remote ManagementiDRAC8 - Enterprise License
Dimensions36 x 24 x 10 in
Weight40

Questions about this item

How do I install the PERC H730 RAID controller in the PowerEdge R730?

The PERC H730 SAS controller is already installed in the dedicated storage slot; connect the 8x 3.5" drive backplane cables to its ports and configure arrays in the BIOS utility.

What maintenance will the dual 495 W power supplies need later?

Both 495 W units are hot-pluggable; replace a failed module by sliding it out and inserting a new one without shutting down the server.

What limit appears first when the two Xeon E5-2650L v3 CPUs run sustained workloads?

The combined 350 W processor draw approaches the 495 W PSU capacity, so power headroom becomes the limiting factor under continuous full-load operation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.