DELL
DELL PowerEdge R730 2x Xeon E5-2697 v3 768GB DDR4 8LFF
A 2U rack server with dual 14-core Xeon processors, 768 GB DDR4 memory, eight 3.5-inch drive bays and a PERC H730 SAS controller
- TypeRack
- CPU TypeIntel Xeon
- CPU Speed2.6GHz
- # of Processors Installed2
- MAX Processors2
- Installed Memory Size768GB
- Dual 14-core Xeon 2697 v3 CPUs deliver high multi-thread throughput
- 768 GB DDR4 ECC registered memory supports large virtualisation workloads
- PERC H730 SAS RAID controller enables flexible storage arrays
- Eight 3.5-inch drive bays provide dense internal capacity
- iDRAC8 Enterprise licence gives full remote server management
Dual Xeon Rack Server
The Dell PowerEdge R730 is a 2U rack-mount server system built around two Intel Xeon E5-2697 v3 processors running at 2.6 GHz with fourteen cores each. It ships with 768 GB of DDR4 ECC registered memory, reaching the platform maximum. The chassis supports eight 3.5-inch drive bays and includes a PERC H730 SAS controller for RAID management.
Verify Power and Network Needs
This unit includes two 495 W power supplies for redundant operation; confirm your rack PDU can deliver the required current on the available connectors. Networking is provided by an Intel I350/X540 card offering two 10 GbE and two 1 GbE ports, so check that your switch ports and cabling match those speeds. Storage drives are not installed; plan to procure compatible SATA or SAS drives for the eight-bay backplane.
Thermals and Acoustics
Dual-processor configurations with full memory population generate significant heat; the R730 uses redundant fans that ramp up under load, producing noticeable noise in quiet office environments. Ensure your rack provides adequate front-to-rear airflow and that inlet temperatures stay within ASHRAE guidelines. The 495 W supplies draw proportionally to total system load, so plan circuit capacity for peak utilisation.
Highlights
- Dual 14-core Xeon 2697 v3 CPUs deliver high multi-thread throughput
- 768 GB DDR4 ECC registered memory supports large virtualisation workloads
- PERC H730 SAS RAID controller enables flexible storage arrays
- Eight 3.5-inch drive bays provide dense internal capacity
- iDRAC8 Enterprise licence gives full remote server management
Specifications
| Brand | DELL |
|---|---|
| Series | PowerEdge |
| Model | Rack Mount |
| Type | Rack |
| CPU Type | Intel Xeon |
| CPU Speed | 2.6GHz |
| # of Processors Installed | 2 |
| MAX Processors | 2 |
| Installed Memory Size | 768GB |
| Memory Type | DDR4 |
| Max Memory Capacity | 768GB |
| Hard Drive (Installed) | 4,00 |
| Storage Controller | Dell PERC H730 SAS Controller |
| HDD Interface | SATA |
| GPU Type | Integrated Graphics |
| Remote Management | iDRAC8 - Enterprise License |
| Dimensions | 36 x 24 x 10 in |
| Weight | 40 |
Questions about this item
Does the server ship with any drives or do I need to buy them separately?
No drives are installed; the 8 LFF bays accept 3.5 inch SATA drives that you must add yourself.
The spec shows 768 GB DDR4 — is that the maximum the board can take?
Yes, 768 GB is both the installed amount and the listed maximum capacity.
What real-world throughput can I expect from the PERC H730 controller with SATA drives?
The H730 SAS controller manages RAID across the 8 bays; actual speed depends on the SATA drives you install.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
DELL OptiPlex 5070 Micro i5-9500T 16GB DDR4 512GB SSD desktop PC
- Business Desktops &…
- Monitor not included
DELL OPTIPLEX3040*SA desktop PC i5-6500 8GB 500GB Win10 Pro Black
- Slim/Small Form Fac…
- Intel Core i5-6500…
ICY DOCK ToughArmor MB994SP-4S 4-bay 2.5" SAS/SATA rack server
- Rack



