We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver rack-mount server chassis with eight front drive bays

DELL

DELL PowerEdge R730 8LFF 2x Xeon E5-2640 v4 768GB DDR4

SKU CH-D6GE-3110N

Rack server with eight 3.5" drive bays, dual 10-core Xeon CPUs at 2.4GHz and 768GB DDR4 memory

  • TypeRack
  • CPU TypeIntel Xeon
  • CPU Speed2.4GHz
  • # of Processors Installed2
  • MAX Processors2
  • Installed Memory Size768GB
  • Dual Xeon E5-2640 v4 processors deliver 10 cores each at 2.4 GHz
  • 768 GB DDR4 ECC memory supports large virtualisation workloads
  • Eight 3.5-inch drive bays with PERC H730 SAS controller enable flexible storage
  • iDRAC8 Enterprise licence provides full remote management out of band
  • Dual 495 W power supplies and Intel 10 GbE networking ensure uptime and throughput

Dell PowerEdge R730 8-bay server

This Dell PowerEdge R730 is a 2U rack-mount server fitted with two Intel Xeon E5-2640 v4 processors at 2.4 GHz and 768 GB of DDR4 ECC memory. The chassis provides eight 3.5-inch drive bays and a PERC H730 SAS controller for RAID storage arrays. Remote management is handled by iDRAC8 Enterprise with full firmware already applied.

Suits virtualisation hosts needing dense memory

The 768 GB maximum memory is fully populated, making this system appropriate for virtualisation clusters or in-memory databases that demand high RAM capacity per node. Buyers who need more storage bays than the eight 3.5-inch slots or who require GPU acceleration for compute workloads should consider a different platform.

Dual Xeon E5-2640 v4 with 10 cores each

Each processor delivers ten cores and 25 MB cache, providing twenty cores total for multi-threaded workloads. The installed memory reaches the board maximum of 768 GB DDR4, so no further RAM upgrades are possible. The PERC H730 controller supports SAS and SATA drives in the eight available bays.

Highlights

  • Dual Xeon E5-2640 v4 processors deliver 10 cores each at 2.4 GHz
  • 768 GB DDR4 ECC memory supports large virtualisation workloads
  • Eight 3.5-inch drive bays with PERC H730 SAS controller enable flexible storage
  • iDRAC8 Enterprise licence provides full remote management out of band
  • Dual 495 W power supplies and Intel 10 GbE networking ensure uptime and throughput

Specifications

BrandDELL
SeriesPowerEdge
ModelRack Mount
TypeRack
CPU TypeIntel Xeon
CPU Speed2.4GHz
# of Processors Installed2
MAX Processors2
Installed Memory Size768GB
Memory TypeDDR4
Max Memory Capacity768GB
Hard Drive (Installed)40,00
Storage ControllerDell PERC H730 SAS Controller
HDD InterfaceSATA
GPU TypeIntegrated Graphics
Remote ManagementiDRAC8 - Enterprise License
Dimensions36 x 24 x 10 in
Weight40

Questions about this item

What rack depth does the 36 x 24 x 10 in chassis require?

The unit is 36 in deep, so a standard 42 U rack with at least 36 in of usable depth and front-to-rear clearance for cable management will accommodate it.

What is the correct order for seating the two Xeon E5-2640 v4 processors and their heatsinks?

Install the first processor and heatsink, then the second processor and heatsink, tightening each retention bracket in a cross pattern before connecting any power cables.

When should the 495 W redundant power supplies be replaced?

Replace a supply if the iDRAC8 Enterprise console reports a critical power-supply fault, the amber LED stays lit after reseating, or the unit fails its self-test during POST.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.