We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

DELL

DELL PowerEdge R730 8LFF 2x Xeon E5-2698 v3 512GB DDR4 rack server

SKU CH-0X0M-MN8SB

A 2U rack server with eight 3.5-inch drive bays, dual 16-core Xeon processors at 2.3GHz and 512GB DDR4 memory

  • TypeRack
  • CPU TypeIntel Xeon
  • CPU Speed2.3GHz
  • # of Processors Installed2
  • MAX Processors2
  • Installed Memory Size512GB
  • Dual Xeon E5-2698 v3 CPUs deliver 32 cores at 2.3GHz
  • 512GB DDR4 ECC memory supports heavy virtualization workloads
  • PERC H730 SAS controller enables flexible RAID storage
  • Eight 3.5-inch drive bays allow high-capacity SATA arrays
  • iDRAC8 Enterprise provides full remote server management

Dell PowerEdge R730 8-bay rack server

This server is a 2U rack-mounted system built for workloads that demand high core counts and large memory capacity. It ships with two Intel Xeon E5-2698 v3 processors running at 2.3GHz, each providing 16 cores, and 512GB of DDR4 ECC registered memory installed. The chassis supports up to eight 3.5-inch drive bays and includes a PERC H730 SAS controller for RAID management.

Suits virtualisation hosts needing dense memory

Buyers who require more than two processor sockets or storage interfaces beyond SAS and SATA should consider other platforms. The integrated iDRAC8 Enterprise licence provides full out-of-band management for remote administration. Network connectivity includes two 10GbE and two 1GbE ports via Intel I350/X540 adapters.

512GB DDR4 ECC memory installed

The system holds 512GB of DDR4 ECC registered memory across its DIMM slots with a maximum supported capacity of 768GB. No drives are installed; the eight 3.5-inch bays accept SATA or SAS drives through the PERC H730 controller. Dual 495W power supplies provide redundancy for continuous operation.

Highlights

  • Dual Xeon E5-2698 v3 CPUs deliver 32 cores at 2.3GHz
  • 512GB DDR4 ECC memory supports heavy virtualization workloads
  • PERC H730 SAS controller enables flexible RAID storage
  • Eight 3.5-inch drive bays allow high-capacity SATA arrays
  • iDRAC8 Enterprise provides full remote server management

Specifications

BrandDELL
SeriesPowerEdge
ModelRack Mount
TypeRack
CPU TypeIntel Xeon
CPU Speed2.3GHz
# of Processors Installed2
MAX Processors2
Installed Memory Size512GB
Memory TypeDDR4
Max Memory Capacity768GB
Hard Drive (Installed)32,00
Storage ControllerDell PERC H730 SAS Controller
HDD InterfaceSATA
GPU TypeIntegrated Graphics
Remote ManagementiDRAC8 - Enterprise License
Dimensions36 x 24 x 10 in
Weight40

Questions about this item

Will the 3.5" drive bays accept my existing SATA HDDs alongside the PERC H730 controller?

The chassis provides eight 3.5" bays with SATA backplane connectivity, and the PERC H730 SAS controller manages both SAS and SATA drives in any mix.

How can I confirm the dual Xeon E5-2698 v3 CPUs and 512 GB DDR4 are recognised after first boot?

Enter the BIOS or iDRAC8 Enterprise interface; both will show two 16-core processors at 2.3 GHz and the full 512 GB of DDR4 ECC registered memory.

Does the box include drive caddies, rail kit or any drives, or must I source them separately?

The server ships with two 495 W power supplies, the PERC H730 RAID controller and 2×10 GbE + 2×1 GbE networking; drives, caddies and rails are not included.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.