DELL
DELL PowerEdge R730xd 24SFF Xeon E5-2620 v4 256GB DDR4 No Drive
24-bay 2.5" rack server with Xeon E5-2620 v4, 256GB DDR4, PERC H730 controller and iDRAC8 Enterprise
- TypeRack
- CPU TypeIntel Xeon
- CPU Speed2.1GHz
- # of Processors Installed1
- MAX Processors2
- Installed Memory Size256GB
- 24 hot-swap 2.5" bays for dense storage capacity
- 256GB DDR4 ECC memory supports demanding workloads
- Xeon E5-2620 v4 8-core processor delivers multi-threaded performance
- PERC H730 SAS controller enables hardware RAID protection
- Dual 10GbE plus dual 1GbE ports provide high-throughput networking
24-bay rack server with 256 GB DDR4
This Dell PowerEdge R730xd fits 24 small-form-factor drives in a 2 U chassis and ships with a single Xeon E5-2620 v4 processor at 2.1 GHz. The installed 256 GB of DDR4 ECC registered memory leaves headroom for expansion up to 768 GB. A PERC H730 SAS controller manages storage, while dual 1100 W supplies and iDRAC8 Enterprise provide power redundancy and remote management.
Suited for dense storage arrays.
The 24-bay layout serves databases, virtualisation hosts and software-defined storage clusters that need many spindles or SSDs behind one RAID controller. Buyers who require dedicated GPU compute or more than two processor sockets should evaluate alternative platforms. The single CPU configuration also limits maximum thread count for heavily parallel tasks.
24 x 2.5-inch drive bays define capacity potential
The chassis accepts up to twenty-four SATA or SAS devices, so the total raw capacity depends entirely on the drives you populate. No drives are included, letting you match media to performance and budget without paying for unused bays.
Highlights
- 24 hot-swap 2.5" bays for dense storage capacity
- 256GB DDR4 ECC memory supports demanding workloads
- Xeon E5-2620 v4 8-core processor delivers multi-threaded performance
- PERC H730 SAS controller enables hardware RAID protection
- Dual 10GbE plus dual 1GbE ports provide high-throughput networking
Specifications
| Brand | DELL |
|---|---|
| Series | PowerEdge |
| Model | Rack Mount |
| Type | Rack |
| CPU Type | Intel Xeon |
| CPU Speed | 2.1GHz |
| # of Processors Installed | 1 |
| MAX Processors | 2 |
| Installed Memory Size | 256GB |
| Memory Type | DDR4 |
| Max Memory Capacity | 768GB |
| Hard Drive (Installed) | 2,00 |
| Storage Controller | Dell PERC H730 SAS Controller |
| HDD Interface | SATA |
| GPU Type | Integrated Graphics |
| Remote Management | iDRAC8 - Enterprise License |
| Dimensions | 36 x 24 x 10 in |
| Weight | 40 |
Questions about this item
How much power do the dual 1100 W supplies draw when the R730xd runs 24/7?
Each supply is rated at 1100 W; actual draw depends on the drives and workload you install. The system ships with two hot-plug units for redundancy.
What drives and caddies must I provide to populate the 24-bay 2.5" chassis?
The chassis accepts 24 SATA or SAS 2.5" drives. No drives or caddies are included, so you must supply both.
Can I keep my existing PERC H730 RAID controller when adding a second Xeon 2620 v4?
The PERC H730 is already installed and supports dual-processor operation. Adding a second E5-2620 v4 does not require a controller change.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



