DELL
DELL PowerEdge R740 2U rack server 2x Silver 4210R 10C 32GB 2x 480GB SATA SSD H730P
A 2U rack server with dual 10‑core Intel Silver 4210R CPUs at 2.4 GHz, 32 GB DDR4, dual 480 GB SATA SSDs on an H730P controller, 8 PCIe Gen 3 slots, dual 10 Gb and dual 1 Gb Ethernet.
- TypeRack
- Rack Height2U
- CPU TypeIntel
- Installed Memory Size32GB
- Hard Drive (Installed)2x 480GB SATA SSD
- Storage ControllerH730P
- Dual 10-core Silver 4210R CPUs at 2.4 GHz for multi-threaded throughput
- 32 GB DDR4 memory in two 16 GB modules for responsive virtualization
- H730P RAID controller with 2 x 480 GB SATA SSDs for protected boot and data
- Eight 2.5-inch drive bays plus up to eight PCIe Gen 3 slots for flexible expansion
- iDRAC9 Enterprise remote management with Intel X550 10 Gb and 1 Gb Ethernet for lights-out control
Purpose-built 2U rack server
The Dell EMC PowerEdge R740 is a 2U rack server designed for virtualisation, database and general compute workloads. Dual Intel Silver 4210R processors deliver twenty cores at 2.4 GHz with 13.75 MB cache each. Thirty-two gigabytes of DDR4 memory and two 480 GB SATA SSDs provide a ready-to-run foundation. The H730P RAID controller and eight 2.5-inch drive bays support local storage expansion. iDRAC9 Enterprise enables full remote management.
Thermal and power profile
Redundant 1100 W power supplies share load to keep the system stable during normal operation. The 2U chassis directs airflow across the processors, memory and drive bays to maintain consistent temperatures. Fan speeds scale with component utilisation rather than running at a fixed high rate. Dual 10 Gb and dual 1 Gb Ethernet ports handle typical network traffic without saturating the backplane. Acoustic output remains suitable for a standard server room environment.
Sustained load behaviour
Under continuous compute demand the twenty cores maintain their 2.4 GHz base frequency without thermal throttling. The H730P controller sustains write throughput to the SSDs during prolonged database or logging activity. PCIe Gen 3 slots support additional accelerators or network adapters for extended workloads. iDRAC9 Enterprise monitoring provides real-time telemetry so administrators can respond before limits are reached. The redundant power architecture prevents interruption if one supply fails.
Highlights
- Dual 10-core Silver 4210R CPUs at 2.4 GHz for multi-threaded throughput
- 32 GB DDR4 memory in two 16 GB modules for responsive virtualization
- H730P RAID controller with 2 x 480 GB SATA SSDs for protected boot and data
- Eight 2.5-inch drive bays plus up to eight PCIe Gen 3 slots for flexible expansion
- iDRAC9 Enterprise remote management with Intel X550 10 Gb and 1 Gb Ethernet for lights-out control
Specifications
| Brand | DELL |
|---|---|
| Model | R740 |
| Type | Rack |
| Rack Height | 2U |
| CPU Type | Intel |
| Installed Memory Size | 32GB |
| Hard Drive (Installed) | 2x 480GB SATA SSD |
| Storage Controller | H730P |
| Max HDD Capacity | 8x 2.5" Drive Bays |
| Remote Management | iDRAC9 Enterprise |
Questions about this item
How do I install the 2x 480GB SATA SSD drives into the 8x 2.5" drive bays and which step is commonly missed?
Slide each SSD into an empty 2.5" bay until the latch clicks, then use the H730P controller BIOS to create a virtual disk before the OS sees the volume.
What maintenance will the 1100W redundant power supply and the H730P RAID controller need over time?
Check PSU fan airflow and LED status monthly; replace a failed PSU hot-plug unit. Monitor H730P battery health and rebuild arrays after any drive swap.
Which limit appears first when both Silver 4210R 10C CPUs run sustained 2.4GHz workloads?
The 1100W redundant PSU capacity and chassis thermal envelope cap combined CPU and PCIe power draw before the 10-core processors hit their frequency ceiling.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



