DELL
DELL PowerEdge R740 8LFF 2x Xeon Gold 6148 256GB DDR4 No Drive rack server
Eight 3.5-inch drive bays, dual Xeon Gold 6148 processors at 2.4 GHz, 256 GB DDR4 and PERC H730P RAID controller in a 2U rack chassis
- TypeRack
- CPU TypeIntel Xeon
- CPU Speed2.4GHz
- # of Processors Installed2
- MAX Processors2
- Installed Memory Size256GB
- Dual Xeon Gold 6148 processors deliver 20 cores at 2.4 GHz for parallel workloads
- 256 GB DDR4 ECC registered memory supports large datasets and virtualization
- Eight 3.5-inch drive bays with PERC H730P RAID controller enable flexible storage arrays
- Integrated 10 GbE 2-port 562T adapter provides high-throughput networking
- iDRAC9 Enterprise licence allows full remote management and firmware updates
2U Rack Server with Dual Xeon Gold 6148
The Dell PowerEdge R740 is a 2U rack-mounted server system equipped with two Intel Xeon Gold 6148 processors running at 2.4GHz. Each CPU provides 10 cores and 27.5 MB of cache. The system includes 256GB of DDR4 ECC registered memory and a PERC H730P RAID controller. Eight 3.5-inch drive bays support SATA hard drives, though no drives are installed. Remote management is handled by iDRAC9 Enterprise.
Suits Virtualisation Hosts and Database Nodes
This configuration suits organisations that need a dense compute platform with high core counts and large memory capacity for virtualisation clusters or in-memory databases. The dual-socket design and 3TB maximum memory ceiling allow significant vertical scaling. Buyers who require GPU acceleration for AI training or rendering should look elsewhere, as only integrated graphics are present. The eight 3.5-inch bays limit raw storage density compared to 2.5-inch alternatives.
Verify Rack Depth and Power Infrastructure
Confirm that your rack can accommodate a chassis depth of 36 inches and that the 750W power supplies match your PDU connectors and circuit capacity. The server ships with two power supplies and includes a 10GbE two-port 562T network adapter, so ensure switch ports and cabling support that speed. Memory expansion uses DDR4 ECC registered modules only. Drive selection must be 3.5-inch SATA models compatible with the PERC H730P controller.
Highlights
- Dual Xeon Gold 6148 processors deliver 20 cores at 2.4 GHz for parallel workloads
- 256 GB DDR4 ECC registered memory supports large datasets and virtualization
- Eight 3.5-inch drive bays with PERC H730P RAID controller enable flexible storage arrays
- Integrated 10 GbE 2-port 562T adapter provides high-throughput networking
- iDRAC9 Enterprise licence allows full remote management and firmware updates
Specifications
| Brand | DELL |
|---|---|
| Series | PowerEdge |
| Model | Rack Mount |
| Type | Rack |
| CPU Type | Intel Xeon |
| CPU Speed | 2.4GHz |
| # of Processors Installed | 2 |
| MAX Processors | 2 |
| Installed Memory Size | 256GB |
| Memory Type | DDR4 |
| Max Memory Capacity | 3TB |
| Hard Drive (Installed) | 16,00 |
| Storage Controller | Dell PERC H730P Controller |
| HDD Interface | SATA |
| GPU Type | Integrated Graphics |
| Remote Management | iDRAC9 - Enterprise License |
| Dimensions | 36 x 24 x 10 in |
| Weight | 40 |
Questions about this item
What chassis and drive-bay count does the R740 need to support the eight 3.5-inch drives listed in the spec?
The server uses an 8LFF chassis with eight 3.5-inch drive bays, so the enclosure must match that form factor for the bays to align.
Can the PERC H730P controller manage legacy SATA drives that are several years old?
Yes, the H730P supports SATA and will recognise older SATA drives, though they will run at the controller's supported speeds.
How can I confirm the iDRAC9 Enterprise licence is active after the server boots?
Open the iDRAC web interface; the licence status screen will show Enterprise as the active tier.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



