DELL
DELL PowerEdge R740xd 24SFF 2x Xeon Silver 4114 1536GB DDR4 No Drive rack server
24-bay 2.5-inch rack server with dual 10-core Xeon Silver 4114 CPUs at 2.2GHz, 1.5TB DDR4 ECC, PERC H730P RAID and 10GbE networking
- TypeRack
- CPU TypeIntel Xeon
- CPU Speed2.2GHz
- # of Processors Installed2
- MAX Processors2
- Installed Memory Size1.5TB
- 24 x 2.5" drive bays for high-density local storage
- 2x Xeon Silver 4114 CPUs at 2.2GHz with 10 cores each
- 1536GB DDR4 ECC registered memory installed
- PERC H730P RAID controller with 13.75MB cache per CPU
- iDRAC9 Enterprise remote management with 10GbE 562T adapter
Dell PowerEdge R740xd 24-bay server
The Dell PowerEdge R740xd is a 2U rack server equipped with twenty-four 2.5-inch drive bays and dual Intel Xeon Silver 4114 processors running at 2.2GHz. It ships with 1.5TB of DDR4 ECC registered memory and a PERC H730P RAID controller. The unit includes dual 1100W power supplies and an iDRAC9 Enterprise licence for remote management.
Suits high-capacity storage clusters.
This configuration suits deployments that need dense local storage in a 2U form factor, such as software-defined storage nodes or backup targets. The twenty-four SAS bays and large memory footprint support heavy database or virtualisation workloads. Buyers who require dedicated GPU acceleration or PCIe add-in cards beyond the storage controller should evaluate alternative platforms.
24 SFF bays define the storage ceiling
The single specification that decides fit is the twenty-four 2.5-inch drive bay count, which sets the maximum number of SAS drives the chassis can hold. With no drives installed, you must populate the bays to reach usable capacity. The PERC H730P controller manages RAID across all populated slots.
Highlights
- 24 x 2.5" drive bays for high-density local storage
- 2x Xeon Silver 4114 CPUs at 2.2GHz with 10 cores each
- 1536GB DDR4 ECC registered memory installed
- PERC H730P RAID controller with 13.75MB cache per CPU
- iDRAC9 Enterprise remote management with 10GbE 562T adapter
Specifications
| Brand | DELL |
|---|---|
| Series | PowerEdge |
| Model | Rack Mount |
| Type | Rack |
| CPU Type | Intel Xeon |
| CPU Speed | 2.2GHz |
| # of Processors Installed | 2 |
| MAX Processors | 2 |
| Installed Memory Size | 1.5TB |
| Memory Type | DDR4 |
| Max Memory Capacity | 3TB |
| Hard Drive (Installed) | 3.600,00 |
| Storage Controller | Dell PERC H730P Controller |
| HDD Interface | SAS |
| GPU Type | Integrated Graphics |
| Remote Management | iDRAC9 - Enterprise License |
| Dimensions | 36 x 24 x 10 in |
| Weight | 40 |
Questions about this item
What power infrastructure must be in place to run the two 1100W supplies?
The server ships with dual 1100W power supplies, so the rack must provide two compatible PDU outlets and circuits rated for the combined load.
Will the PERC H730P controller recognise SAS drives from earlier Dell generations?
The PERC H730P RAID controller supports standard SAS drives, allowing older 2.5" SAS disks to be used in the 24 drive bays.
How can I confirm the 1536GB DDR4 memory is fully detected after installation?
Check the iDRAC9 Enterprise interface or the BIOS memory map; both will show all 1.5TB of DDR4 ECC registered memory as present and operational.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
