DELL
DELL PowerEdge T430 16SFF 2x Xeon E5-2690 v4 384GB DDR4 rack server
Dual 14-core Xeon 2.6 GHz server with 384 GB DDR4, PERC H730 SAS controller and 16 2.5-inch bays in a 4U rack chassis
- TypeRack
- CPU TypeIntel Xeon
- CPU Speed2.6GHz
- # of Processors Installed2
- MAX Processors2
- Installed Memory Size384GB
- Dual Xeon E5-2690 v4 processors with 14 cores each deliver strong multi-threaded performance
- 384GB DDR4 ECC registered memory supports large virtualisation workloads and in-memory databases
- 16 hot-swap 2.5-inch drive bays with PERC H730 SAS controller enable flexible storage arrays
- iDRAC8 Express remote management provides out-of-band monitoring and control
- Dual 1100W power supplies offer redundancy for continuous operation
Dual Xeon E5-2690 v4 rack server
The Dell PowerEdge T430 arrives as a 2U rack-mount system with two Intel Xeon E5-2690 v4 processors installed. Each CPU runs at 2.6 GHz and provides 14 cores with 35 MB cache. The platform is populated with 384 GB of DDR4 ECC registered memory, reaching the maximum supported capacity. It targets organisations that need dense compute and memory in a standard rack footprint.
Upgrade from single-socket or lower-core systems
Moving from a single-processor server or from earlier E5 v3 models adds a second 14-core CPU and doubles the memory ceiling to 384 GB. The jump is worthwhile when workloads such as virtualisation hosts, database instances or high-thread-count batch jobs can use the extra cores and memory channels. The PERC H730 RAID controller supports SAS drives and replaces basic onboard controllers that lack hardware RAID acceleration.
Fits 16-bay 2.5-inch chassis
The 16 SFF drive bays accept 2.5-inch SAS drives; no drives are included so you choose capacity and redundancy. Two 1100 W power supplies provide redundancy. Integrated graphics and a dual-port 1 GbE 332T adapter handle basic display and network needs. Remote management is available through iDRAC8 Express. Rails are offered on request for rack installation.
Highlights
- Dual Xeon E5-2690 v4 processors with 14 cores each deliver strong multi-threaded performance
- 384GB DDR4 ECC registered memory supports large virtualisation workloads and in-memory databases
- 16 hot-swap 2.5-inch drive bays with PERC H730 SAS controller enable flexible storage arrays
- iDRAC8 Express remote management provides out-of-band monitoring and control
- Dual 1100W power supplies offer redundancy for continuous operation
Specifications
| Brand | DELL |
|---|---|
| Series | PowerEdge |
| Model | Rack Mount |
| Type | Rack |
| CPU Type | Intel Xeon |
| CPU Speed | 2.6GHz |
| # of Processors Installed | 2 |
| MAX Processors | 2 |
| Installed Memory Size | 384GB |
| Memory Type | DDR4 |
| Max Memory Capacity | 384GB |
| Hard Drive (Installed) | 9,60 |
| Storage Controller | Dell PERC H730 SAS Controller |
| HDD Interface | SAS |
| GPU Type | Integrated Graphics |
| Remote Management | iDRAC8 - Express License |
| Dimensions | 36 x 24 x 10 in |
| Weight | 40 |
Questions about this item
What rack depth, width and height does the 36 x 24 x 10 in chassis require?
The server measures 36 inches deep, 24 inches wide and 10 inches high, so the rack must provide at least that much clear space.
Which rails or mounting hardware are needed to install the T430 in a rack?
A compatible rail kit is available on request and must be fitted before sliding the 40 lb chassis into the rack.
When should the two 1100W power supplies be replaced?
Replace a supply if the iDRAC8 remote management reports a fault or the unit fails to power on during the POST sequence.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



