We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Dell PowerEdge T430 5U tower server, black metal chassis with front drive bays

DELL

DELL PowerEdge T430 5U Rack Server 2x Xeon E5-2695 v4 2.1GHz 18C 16GB DDR4 H730P 4x 960GB SSD

SKU CH-5W1V-7XBJB

Dual 18-core Xeon processors at 2.1 GHz with 3.3 GHz turbo, 16 GB DDR4, H730P RAID controller and four 960 GB SSDs in a 5U rack server

  • TypeRack
  • Rack Height5U
  • Redundant Hot-swap PowerYes
  • CPU TypeIntel Xeon
  • CPU Speed2.1GHz (3.3GHz Turbo)
  • CPU SocketLGA 2011
  • Dual Xeon E5-2695 v4 processors provide 18 cores each for multi-threaded performance
  • 16 GB DDR4 ECC memory installed with capacity up to 384 GB across 12 slots
  • PERC H730P controller supports RAID 0, 1, 5, 6, 10, 50, 60 with 2 GB cache
  • Four 960 GB SATA SSDs deliver high-capacity solid-state storage in 16 hot-swap bays
  • Dual 750 W platinum power supplies and iDRAC 8 Express ensure uptime and remote management

Dual 18-Core Xeon Platform

The Dell PowerEdge T430 arrives as a 5U rack server with two Intel Xeon E5-2695 v4 processors, each delivering 18 cores at 2.1 GHz with a 3.3 GHz turbo frequency. This configuration targets businesses running virtualization, database workloads, or private-cloud infrastructure that benefit from high thread counts and ECC memory integrity. The system supports a maximum of two processors, so the installed pair already saturates the CPU capacity.

16 GB DDR4 with 384 GB Ceiling

The server ships with 16 GB of DDR4-2400 ECC registered memory across two modules, leaving ten of twelve slots open for expansion up to 384 GB. Four 960 GB SATA SSDs are pre-installed behind the PERC H730P 2 GB controller, which provides RAID 0, 1, 5, 6, 10, 50, and 60 plus pass-through modes. Twelve remaining 2.5-inch hot-swap bays accept additional SAS or SATA drives, while the controller’s 12 Gb/s SAS interface sets the throughput ceiling for the storage subsystem.

Redundant 750 W PSUs and iDRAC 8 Express

Dual 750 watt platinum power supplies provide hot-swap redundancy without consuming PCIe slots. The integrated dual-port Gigabit Ethernet adapter handles baseline connectivity, and iDRAC 8 Express enables remote management and lifecycle control. PCI Express slots remain available for additional RAID, networking, or acceleration cards. Front bezel and ready rails are not included, so rack-mount installations will need a separate conversion kit and mounting hardware.

Highlights

  • Dual Xeon E5-2695 v4 processors provide 18 cores each for multi-threaded performance
  • 16 GB DDR4 ECC memory installed with capacity up to 384 GB across 12 slots
  • PERC H730P controller supports RAID 0, 1, 5, 6, 10, 50, 60 with 2 GB cache
  • Four 960 GB SATA SSDs deliver high-capacity solid-state storage in 16 hot-swap bays
  • Dual 750 W platinum power supplies and iDRAC 8 Express ensure uptime and remote management

Specifications

BrandDELL
SeriesPowerEdge
ModelT430
TypeRack
Rack Height5U
Redundant Hot-swap PowerYes
CPU TypeIntel Xeon
CPU Speed2.1GHz (3.3GHz Turbo)
CPU SocketLGA 2011
Number of CPU Cores18 Core-Processors
CPU FeaturesE5-2695 v4
# of Processors Installed2
MAX Processors2
Installed Memory Size16GB
Memory TypeDDR4
Max Memory Capacity384GB
Number of Memory Slots12
Hard Drive (Installed)None
Storage ControllerDell Perc H730P 2GB Controller
HDD InterfaceSATA
SSD (Installed)4 x 960GB SATA SSD
Raid LevelRAID 0/1/5/6/10/50/60
Ethernet ControllerIntegrated Dell 2x1GbE Dual Port Ethernet Adapter
Remote ManagementiDRAC8 Express
LAN Ports2 x Ports
Management PortRJ 45
Operating SystemNo

Questions about this item

Will the 2.1 GHz 18-core Xeon E5-2695 v4 CPUs work with my existing DDR4-2400 ECC RDIMMs if I expand memory?

Yes, the server supports DDR4-2400 ECC Registered DIMMs up to 384 GB across 12 slots, so your current modules are compatible.

How do I verify the PERC H730P RAID controller and the four 960 GB SSDs are healthy after installation?

Use the iDRAC 8 Express interface or boot into the PERC H730P BIOS utility to confirm controller firmware, battery status, and that all four SSDs appear in a healthy RAID array.

Which components ship with the server and which items such as rails or bezel must be purchased separately?

The system includes two Xeon E5-2695 v4 CPUs, 16 GB DDR4, PERC H730P with battery, four 960 GB SSDs, dual 1 GbE ports, iDRAC 8 Express, and two 750 W PSUs; front bezel and ready rails are not included.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.