We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

DELL

DELL PowerEdge T430 5U Rack Server 2x Xeon E5-2695 v4 2.1GHz 18C 256GB DDR4 HBA330 2x750W

SKU CH-RPS9-37CM6

5U tower server with dual 18-core Xeon processors at 2.1 GHz, 256 GB DDR4 ECC memory, HBA330 storage controller, sixteen 2.5-inch drive bays, dual Gigabit Ethernet, iDRAC 8 Express.

  • TypeRack
  • Rack Height5U
  • Redundant Hot-swap PowerYes
  • CPU TypeIntel Xeon
  • CPU Speed2.1GHz (3.3GHz Turbo)
  • CPU SocketLGA 2011
  • Dual 18-core Xeon processors at 2.1 GHz with 3.3 GHz Turbo for demanding workloads
  • 256 GB DDR4-2400 ECC memory across 8 slots with room to reach 384 GB
  • PERC HBA330 12 Gb/s controller supporting SAS and SATA drives in 16 hot-swap bays
  • iDRAC 8 Express remote management with Lifecycle Controller for simplified administration
  • Redundant 750 W platinum power supplies with hot-swap capability for continuous uptime

PowerEdge T430 5U server

The Dell PowerEdge T430 is a 5U tower server that supports dual Intel Xeon E5-2695 v4 processors, each delivering 18 cores at 2.1 GHz with 3.3 GHz turbo. It arrives with 256 GB of DDR4-2400 ECC registered memory installed across eight 32 GB modules. The system targets virtualization, database hosting, and business-critical workloads that demand high core counts and large memory capacity.

Installation and common issues

The server uses tool-less drive trays for the sixteen 2.5-inch hot-swap bays, and the HBA330 controller connects via a standard PCIe slot. Memory populates twelve DDR4 slots in specific bank order; mixing registered and unbuffered modules will prevent boot. The redundant 750 W power supplies are hot-swappable, but both must share the same input voltage to avoid a mismatch alert in iDRAC 8 Express.

Capacity and headroom

With 256 GB installed, the system has headroom to reach the 384 GB maximum across twelve slots. The HBA330 handles SAS and SATA drives across all sixteen bays, supporting large RAID arrays for file storage or backup targets. Dual 1 GbE ports provide baseline connectivity; heavier network traffic will require add-in NICs. CPU turbo reaches 3.3 GHz, but sustained all-core loads stay at the 2.1 GHz base frequency.

Highlights

  • Dual 18-core Xeon processors at 2.1 GHz with 3.3 GHz Turbo for demanding workloads
  • 256 GB DDR4-2400 ECC memory across 8 slots with room to reach 384 GB
  • PERC HBA330 12 Gb/s controller supporting SAS and SATA drives in 16 hot-swap bays
  • iDRAC 8 Express remote management with Lifecycle Controller for simplified administration
  • Redundant 750 W platinum power supplies with hot-swap capability for continuous uptime

Specifications

BrandDELL
SeriesPowerEdge
ModelT430
TypeRack
Rack Height5U
Redundant Hot-swap PowerYes
CPU TypeIntel Xeon
CPU Speed2.1GHz (3.3GHz Turbo)
CPU SocketLGA 2011
Number of CPU Cores18 Core-Processors
CPU FeaturesE5-2695 v4
# of Processors Installed2
MAX Processors2
Installed Memory Size256GB
Memory TypeDDR4
Max Memory Capacity384GB
Number of Memory Slots12
Hard Drive (Installed)None
Storage ControllerDell Perc HBA330 Controller
SSD (Installed)No
Raid LevelNone
Ethernet ControllerIntegrated Dell 2x1GbE Dual Port Ethernet Adapter
Remote ManagementiDRAC8 Express
LAN Ports2 x Ports
Management PortRJ 45
Operating SystemNo

Questions about this item

How do I confirm both Xeon E5-2695 v4 processors and all 256GB DDR4-2400 ECC memory are detected after initial boot?

Enter the BIOS or iDRAC 8 Express interface on first start; both CPUs should show 18 cores each at 2.1GHz with 3.3GHz turbo, and all twelve memory slots should report 32GB DDR4 modules totalling 256GB.

Which components ship with the T430 and which must be purchased separately?

Included: dual Xeon E5-2695 v4 CPUs, 256GB DDR4-2400 ECC RDIMMs (8×32GB), PERC HBA330 controller, eight 2.5″ drive trays, dual 750W platinum PSUs, dual 1GbE ports, iDRAC 8 Express. Not included: any drives, front bezel, or rack rails.

Which memory configuration should I choose if I want to reach the 384GB maximum later?

The board has twelve DDR4 slots; eight are filled with 32GB modules today. Adding four more 32GB DDR4-2400 ECC RDIMMs will bring the system to the 384GB limit without replacing existing memory.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.