We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Tall silver 5U tower server chassis with front drive bays and bezel removed

DELL

DELL PowerEdge T440 5U Rack Server 2x Xeon Gold 5120 2.2GHz 14 Core 32GB DDR4 H730P

SKU CH-8EBY-98XR2

5U rack server with dual 14-core Xeon Gold 5120 CPUs, 32 GB DDR4, H730P RAID controller, and 16 hot-swap 2.5-inch bays

  • TypeRack
  • Rack Height5U
  • Redundant Hot-swap PowerYes
  • CPU TypeIntel Xeon
  • CPU Speed2.2GHz (3.2GHz Turbo)
  • CPU SocketLGA 3647
  • Dual Xeon Gold 5120 CPUs provide 14 cores each at 2.2GHz base clock
  • 32GB DDR4-2400 ECC registered memory installed across 4 modules
  • PERC H730P controller supports RAID 0, 1, 5, 6, 10, 50, 60 with 2GB cache
  • 16 hot-swap 2.5-inch drive bays with 8 trays included for SAS/SATA/SSD
  • iDRAC 9 Express enables remote management with dual 750W platinum power supplies

Dell PowerEdge T440 5U Tower Server

This new Dell PowerEdge T440 is a 5U tower server that supports up to sixteen 2.5-inch hot-swap drive bays. It ships with two Intel Xeon Gold 5120 processors, each running at 2.2GHz with a 3.2GHz turbo frequency and 14 cores. The system includes 32GB of DDR4-2400 ECC registered memory across four modules and a Dell PERC H730P 2GB 12Gb/s SAS/SATA RAID controller. Dual 750W platinum power supplies provide redundant hot-swap power.

Suited for virtualization.

The dual 14-core Xeon configuration and 16 memory slots supporting up to 1TB DDR4 make this server appropriate for VMware ESXi, Hyper-V or Proxmox VE virtualization clusters. Integrated iDRAC 9 Express enables remote lifecycle management. Buyers who need GPU-accelerated compute or a pre-populated storage array should evaluate alternative configurations. The front bezel and ready rails are not included with this unit.

PERC H730P RAID controller with 2GB cache

The installed Dell PERC H730P controller supports RAID levels 0, 1, 5, 6, 10, 50 and 60 plus pass-through mode for SAS and SATA drives. Its 2GB battery-backed cache accelerates write performance for database and virtualization workloads. The chassis provides eight 2.5-inch drive trays installed, leaving eight additional bays available for expansion. Dual-port gigabit Ethernet is integrated on the motherboard.

Highlights

  • Dual Xeon Gold 5120 CPUs provide 14 cores each at 2.2GHz base clock
  • 32GB DDR4-2400 ECC registered memory installed across 4 modules
  • PERC H730P controller supports RAID 0, 1, 5, 6, 10, 50, 60 with 2GB cache
  • 16 hot-swap 2.5-inch drive bays with 8 trays included for SAS/SATA/SSD
  • iDRAC 9 Express enables remote management with dual 750W platinum power supplies

Specifications

BrandDELL
SeriesPowerEdge
ModelT440
TypeRack
Rack Height5U
Redundant Hot-swap PowerYes
CPU TypeIntel Xeon
CPU Speed2.2GHz (3.2GHz Turbo)
CPU SocketLGA 3647
Number of CPU Cores14 Core-Processors
CPU FeaturesGold 5120
# of Processors Installed2
MAX Processors2
Installed Memory Size32GB
Memory TypeDDR4
Max Memory Capacity1TB
Number of Memory Slots16
Hard Drive (Installed)None
Storage ControllerDell Perc H730P 2GB Controller
SSD (Installed)No
Raid LevelRAID 0/1/5/6/10/50/60
Ethernet ControllerIntegrated Dell 2x1GbE Dual Port Ethernet Adapter
Remote ManagementiDRAC9 Express
LAN Ports2 x Ports
Management PortRJ 45
Operating SystemNo

Questions about this item

How can I verify the dual Xeon Gold 5120 processors are running at 2.2GHz with 3.2GHz turbo after installation?

Check the BIOS or iDRAC 9 Express system inventory; both will report each CPU at 2.2GHz base and 3.2GHz turbo across all 14 cores.

The listing mentions 8x 2.5" trays and a H730P controller — what else must I purchase to populate the 16-bay chassis?

You need eight additional 2.5" drive trays plus SAS or SATA drives; the server ships with 32GB DDR4-2400 ECC RDIMM in four slots and two 750W PSUs already installed.

Should I choose the current 32GB DDR4-2400 configuration or add modules up to the 1TB maximum?

Start with the installed 32GB across four of sixteen slots; add DDR4-2400 ECC RDIMMs in matched pairs when workloads demand more capacity.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.