DELL
DELL PowerEdge T630 8LFF 2x Xeon E5-2699v4 768GB DDR4 rack server
A rack-mount server with two 22-core Xeon processors at 2.2GHz, 768GB DDR4 memory, eight 3.5-inch drive bays and a PERC H730 SAS controller
- TypeRack
- CPU TypeIntel Xeon
- CPU Speed2.2GHz
- # of Processors Installed2
- MAX Processors2
- Installed Memory Size768GB
- Dual Xeon E5-2699 v4 processors provide 22 cores each for parallel workloads
- 768GB DDR4 ECC registered memory supports large datasets and virtualization
- Eight 3.5-inch drive bays with PERC H730 SAS controller enable flexible storage arrays
- iDRAC8 Enterprise licence allows remote management and firmware updates
- 2 GHz base frequency balances performance and power efficiency
Dell PowerEdge T630 dual Xeon rack server
This Dell PowerEdge T630 rack server ships with two Intel Xeon E5-2699 v4 processors running at 2.2GHz and 768GB of DDR4 ECC registered memory. It includes a PERC H730 SAS RAID controller and an 8-bay 3.5" chassis supporting SATA drives. Remote management is provided by iDRAC8 Enterprise.
Suited for memory-heavy workloads
The dual 22-core CPUs and 768GB RAM suit virtualisation hosts, database nodes and render farms that need large memory capacity. The eight 3.5" bays allow high-capacity SATA storage behind the hardware RAID controller. Buyers needing GPU acceleration or 10 GbE connectivity should look elsewhere.
768GB DDR4 ECC registered memory installed
The system arrives with 768GB of DDR4 ECC registered memory populated across the available slots. Maximum supported capacity is 1.5TB if further expansion is required. Memory type and capacity are the primary factors when confirming compatibility with existing clusters.
Highlights
- Dual Xeon E5-2699 v4 processors provide 22 cores each for parallel workloads
- 768GB DDR4 ECC registered memory supports large datasets and virtualization
- Eight 3.5-inch drive bays with PERC H730 SAS controller enable flexible storage arrays
- iDRAC8 Enterprise licence allows remote management and firmware updates
- 2 GHz base frequency balances performance and power efficiency
Specifications
| Brand | DELL |
|---|---|
| Series | PowerEdge |
| Model | Rack Mount |
| Type | Rack |
| CPU Type | Intel Xeon |
| CPU Speed | 2.2GHz |
| # of Processors Installed | 2 |
| MAX Processors | 2 |
| Installed Memory Size | 768GB |
| Memory Type | DDR4 |
| Max Memory Capacity | 1.5TB |
| Hard Drive (Installed) | 4,00 |
| Storage Controller | Dell PERC H730 SAS Controller |
| HDD Interface | SATA |
| GPU Type | Integrated Graphics |
| Remote Management | iDRAC8 - Enterprise License |
| Dimensions | 36 x 24 x 10 in |
| Weight | 40 |
Questions about this item
What SAS standard does the PERC H730 RAID controller use, and what throughput does that cap each drive at?
The PERC H730 is a 12 Gb/s SAS controller, so each attached drive is limited to 12 Gb/s maximum throughput.
What are the chassis dimensions and weight, and how many 3.5" drive bays does it provide?
The chassis measures 36 x 24 x 10 in, weighs 40 lb, and provides 8 bays for 3.5" drives.
How is the iDRAC8 Enterprise licence activated after the server is racked and powered on?
Connect the dedicated iDRAC network port, browse to the default IP, log in with the factory credentials, then apply the Enterprise licence key from the Dell licence portal.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



