DELL
DELL XX518 146GB 16MB 3.0Gbps 15K 3.5" SAS internal hard drive in Poweredge Tray
A 146 GB SAS hard drive spinning at 15 000 rpm with a 16 MB cache, supplied in a Dell PowerEdge tray
- 15K RPM SAS drive delivers fast transactional throughput
- 146 GB capacity fits database logs and OS volumes
- 16 MB cache smooths burst I/O workloads
- 0 Gbps SAS interface connects directly to RAID controllers
- Supplied in PowerEdge tray for tool-less server installation
DELL XX518 146GB SAS drive
The DELL XX518 is a 146GB 3.5-inch SAS hard drive spinning at 15K RPM with a 16MB cache and a 3.0Gbps interface. It ships mounted in a PowerEdge tray for direct installation into compatible Dell servers. The unit is supplied new.
Suits Dell PowerEdge bays needing 15K SAS
This drive fits administrators replacing a failed 146GB 15K SAS unit in a PowerEdge chassis that accepts the supplied tray. It is not for systems that require a different tray style or a capacity beyond 146GB. Buyers needing a 6Gbps SAS interface should look elsewhere.
3.0Gbps SAS interface decides compatibility
The single specification that determines fit is the 3.0Gbps SAS interface; the host backplane must support this exact signalling rate. A 6Gbps-only controller will not negotiate the required link speed. Verify the tray matches your server generation before ordering.
Highlights
- 15K RPM SAS drive delivers fast transactional throughput
- 146 GB capacity fits database logs and OS volumes
- 16 MB cache smooths burst I/O workloads
- 0 Gbps SAS interface connects directly to RAID controllers
- Supplied in PowerEdge tray for tool-less server installation
Specifications
No published specifications for this item yet.
Questions about this item
Does this 3.5" SAS drive require a compatible SAS controller or backplane to operate?
Yes, the drive uses a SAS 3.0Gbps interface and needs a SAS-capable controller or backplane that supports 3.5-inch form factor drives.
Will the 15K RPM spindle speed cause issues if installed alongside slower drives in the same array?
The 15K RPM speed and 16MB cache are independent per drive; mixed speeds are supported by the controller, though the array will perform at the speed of the slowest member.
How can I verify the 146GB capacity and 15K RPM are recognised correctly after installation?
Check the BIOS or RAID utility for the reported capacity of 146GB and rotational speed of 15K, and run a SMART diagnostic to confirm the drive passes all self-tests.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



