We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 2.5 inch SATA SSD, 60GB, 7mm thick, label with Shark branding

Dogfish Technology

Dogfish Technology Shark 2.5 60G 60GB SATA internal SSD

SKU CH-0T9K-CE8Y6

A 2.5" SATA internal SSD with 60GB capacity and 3D NAND flash delivering up to 540MB/s read and 500MB/s write speeds

  • Device TypeInternal Solid State Drive (SSD)
  • Used ForConsumer
  • Form Factor2.5"
  • Capacity60GB
  • Memory Components3D NAND
  • InterfaceSATA III

Options 60GB

  • Fast boot and load times with up to 550 MB/s reads
  • Quick file saves at up to 500 MB/s writes
  • Reliable operation backed by 1,000,000 hours MTBF
  • Data integrity protected by built-in ECC and bad-block management
  • Low power draw in sleep with DevSleep support

Capacity and audience

The Dogfish Technology Shark 2.5 60G is a 60GB internal solid state drive built for consumer desktops and laptops. Its 2.5 inch form factor and SATA interface make it a direct replacement for mechanical hard drives in older systems.

Build and daily use

The drive measures 100mm by 69mm by 6.8mm and weighs 100g, fitting standard 2.5 inch bays with a 7mm height profile. A SMI controller manages 3D NAND flash, while built-in ECC, bad block management, TRIM, NCQ and DevSleep support maintain data integrity and low power states during everyday operation.

Interface limits

Sequential reads reach up to 540 MBps and writes up to 500 MBps over the SATA III link, with the supplier noting peaks of 550 MBps read and 400 MBps write. The SATA bus caps throughput well below modern PCIe speeds, and the 60GB capacity restricts the amount of software and media that can reside on the drive.

Highlights

  • Fast boot and load times with up to 550 MB/s reads
  • Quick file saves at up to 500 MB/s writes
  • Reliable operation backed by 1,000,000 hours MTBF
  • Data integrity protected by built-in ECC and bad-block management
  • Low power draw in sleep with DevSleep support

Specifications

BrandShark
SeriesShark 2.5 60G
ModelShark SSD 2.5 60G
Device TypeInternal Solid State Drive (SSD)
Used ForConsumer
Form Factor2.5"
Capacity60GB
Memory Components3D NAND
InterfaceSATA III
ControllerSMI
Max Sequential ReadUp to 540 MBps
Max Sequential WriteUp to 500 MBps
MTBF1,000,000 hours
Height100mm
Width69mm
Depth6.8mm
Weight100g

Other versions of this model

3 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What real-world speed does the SATA III interface cap this 60GB drive at?

The SATA III link limits sequential throughput to the drive's rated 540 MBps read and 500 MBps write.

Will the 6.8 mm depth fit my laptop's 7 mm bay?

Yes, at 6.8 mm thick it slides into any standard 7 mm 2.5-inch slot.

Do I need to enable AHCI or TRIM in BIOS before cloning my OS?

Set the controller to AHCI mode, then let the OS issue TRIM — skipping AHCI is the common mistake.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.