eero
eero Pro 6E AXE5400 Tri-Band Wi-Fi 6E Router (3-pack) B091G64GVK
Tri-band Wi-Fi 6E mesh system covers up to 6,000 sq ft with speeds up to 2.3 Gbps and supports 100+ devices
- WiFi GenerationWi-Fi 6E
- Wireless Data RatesAXE5400
- Covers up to 6000 sq ft with Wi-Fi 6E tri-band mesh
- Delivers 2.3 Gbps network speeds via 2.5 Gb Ethernet and 1.6 Gbps wireless
- TrueMesh technology routes traffic to reduce drop-offs for 8K streaming and VR
- eero app enables setup in minutes and remote network management from anywhere
- Built-in Thread and Zigbee smart home hub connects devices directly with Alexa
Tri-Band Mesh System for Large Homes
This three-pack covers up to 6,000 sq. ft. with Wi-Fi 6E and supports over 100 connected devices. It delivers combined speeds up to 2.3 Gbps using wired and wireless clients together. The system suits households with gigabit-plus internet plans and heavy streaming or VR demands.
Built-In Smart Home Hub Included
Each unit integrates a Thread and Zigbee radio plus Bluetooth Low Energy 5.0 for direct Alexa device pairing. The eero app handles setup and remote network management in minutes. Free customer support is available seven days a week for troubleshooting assistance.
Verify Modem and Client Compatibility First
The primary node connects to your modem via a 2.5 Gbps or 1 Gbps Ethernet port. You need a supported iOS or Android device and an active internet service to complete setup. Ensure your devices can use Wi-Fi 6E to reach the 1.6 Gbps wireless maximum.
Highlights
- Covers up to 6000 sq ft with Wi-Fi 6E tri-band mesh
- Delivers 2.3 Gbps network speeds via 2.5 Gb Ethernet and 1.6 Gbps wireless
- TrueMesh technology routes traffic to reduce drop-offs for 8K streaming and VR
- eero app enables setup in minutes and remote network management from anywhere
- Built-in Thread and Zigbee smart home hub connects devices directly with Alexa
Specifications
| Model | B091G64GVK |
|---|---|
| WiFi Generation | Wi-Fi 6E |
| Wireless Data Rates | AXE5400 |
| Shipping weight | 1.81 kg |
| Package size | 127 × 127 × 127 mm |
Questions about this item
Will the eero Pro 6E mesh nodes need firmware updates or hardware replacement as Wi-Fi standards change?
The system receives automatic firmware updates through the eero app to maintain security and performance. Hardware has no user-serviceable parts; replacement is only needed if a future standard becomes essential for your devices.
What throughput limit appears first when the 2.5 GbE WAN port and tri-band radios run at full load continuously?
The 2.5 GbE port caps wired throughput at 2.5 Gbps, while combined wireless client speeds peak at 1.6 Gbps; total aggregate traffic is rated at 2.3 Gbps, so the WAN port is the first hard ceiling.
How much heat and fan noise should I expect from a node operating 24/7 in a 25 °C room?
Each node is passively cooled with no fan, so it produces zero audible noise. The chassis stays within the 0–40 °C operating range; at 25 °C ambient it runs warm but well inside thermal limits.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



