We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black anodised aluminium bracket holding two 2.5-inch drives in a 5.25-inch bay with cables and screws

EN-Labs

EN-Labs 2 Bay 2.5" to 5.25" Hard Drive Adapter Kit - Black

SKU CH-H0GX-6P0BM

Mounts two 2.5-inch SATA or SAS drives into a standard 5.25-inch bay using an anodised aluminium bracket and includes 10-inch SATA data cables plus 12-inch Molex-to-SATA power cables

  • SpecificationsFits in Standard 5.25 inch Driver Bay and may not fit in cha
  • Features2mm Anodized aluminum bracket available in black Fits in a 5
  • Package ContentsMounting Bracket 12 (6+6) inch Molex 4 Pin to x2 15 Pin SATA
  • Mount two 2.5" drives in one 5.25" bay
  • 2 mm anodised aluminium bracket keeps drives cool and secure
  • 10-inch SATA III cables with locking latches ensure reliable data links
  • 12-inch Molex-to-SATA power cables supply both drives from one connector
  • Sixteen screws and four rubber washers included for vibration-free mounting

2.5" to 5.25" Drive Bay Adapter Kit

This black anodized aluminium bracket converts a single standard 5.25-inch optical bay into space for two 2.5-inch SATA, SAS or IDE drives. The kit includes two 10-inch SATA III 6 Gbps data cables with locking latches and two 12-inch Molex-to-SATA power leads, so both drives connect immediately without extra purchases.

Builders adding SSDs to legacy cases

Ideal for system integrators or enthusiasts fitting a pair of 2.5-inch solid-state or mechanical drives into older tower or server chassis that still expose a 5.25-inch front opening. Sixteen mounting screws and four rubber washers are supplied for vibration-free installation. Not suited for slimline or custom-bay enclosures where the front aperture deviates from the standard 5.25-inch form factor.

SATA III 6 Gbps data interface

The included 10-inch cables provide a native SATA 6 Gbps link to each drive, ensuring full SSD throughput without adapter bottlenecks. Power is delivered via the Molex-to-SATA leads, so no spare SATA power headers are required on the PSU.

Highlights

  • Mount two 2.5" drives in one 5.25" bay
  • 2 mm anodised aluminium bracket keeps drives cool and secure
  • 10-inch SATA III cables with locking latches ensure reliable data links
  • 12-inch Molex-to-SATA power cables supply both drives from one connector
  • Sixteen screws and four rubber washers included for vibration-free mounting

Specifications

SpecificationsFits in Standard 5.25 inch Driver Bay and may not fit in chassis with customized Bay Please ensure the 5.25 inch Driver Bay of your computer is standard size before ordering this item.
2 x 2.5 - inch Drive could Mounted to this ITEM at the Same Time. However Mounting only ONE drive is recommended for heat dissipation.
SATA III 6Gbps data cable included
Molex to SATA 15-pin power cable include, support 12V/5V PSU
Features2mm Anodized aluminum bracket available in black
Fits in a 5.25-inch drive bay, and allows the mounting of 2 x 2.5- inch drive
Compatible with any 2.5 inch IDE,SATA, or SAS hard drive and solid state disk
Combo with 10 inches SATA Data and Power cable, one-stop resolution for your HDD/SDD mounting
1x Mounting Screws Pack is included
Package ContentsMounting Bracket
12 (6+6) inch Molex 4 Pin to x2 15 Pin SATA Power Cable with Net Jacket
10inches SATA III 6Gbps Data Cables with latch locking
1x Mounting Screws Pack is included

Questions about this item

What SATA speed does the included 10-inch data cable support?

The supplied 10-inch cable is rated for SATA III 6 Gbps, so it caps the link at 6 Gbps even if the drive can run faster.

What are the physical mounting requirements for the bracket?

The 2 mm anodized aluminium bracket fits a standard 5.25-inch drive bay and holds two 2.5-inch drives using the included 16 screws and four rubber washers.

How are the drives powered and what is the common installation mistake?

A 12-inch Molex 4-pin to dual 15-pin SATA power cable is included; the step often missed is connecting both 15-pin plugs so each drive receives power.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.