ARCTIC COOLING ACTCP00007B MX-4 2019 Edition thermal paste 2.0g
- 2.0g
- 8.5 W/mK
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
FormulaMod
A PSU extension cable kit with ATX 24-pin, two PCI-E 8-pin and one CPU 8-pin connectors in mix colour, 300 mm long with 18 AWG cores and included combs
Color Blue
Struck-through versions exist but are not stocked here.
The FormulaMod NCK2 Series kit supplies a set of mix colour extension cables for ATX 24-pin, PCI-E 8-pin and CPU 8-pin connections. Each cable measures 300 mm in length and uses 18 AWG conductors with a 3 mm outer diameter. Male 5557 to female 5559 interfaces allow the extensions to plug directly between an existing power supply and the motherboard or graphics card. The kit includes cable combs for tidy routing inside the case.
Before ordering, confirm that your power supply provides the standard ATX 24-pin, PCI-E 8-pin and CPU 8-pin outputs required by this kit. Verify that the 300 mm length reaches from your PSU to each component without strain. Ensure the 3 mm cable diameter and included combs fit within your case cable channels and do not obstruct airflow paths or other hardware.
These passive extensions add no fans or active cooling, so they generate no noise and contribute negligible heat to the system. The 18 AWG copper cores handle normal power delivery without measurable temperature rise under typical loads. Power draw remains unchanged from the supply ratings, as the cables simply extend the existing connections. The combs keep wires organised, helping maintain steady airflow through the chassis.
| Series | No |
|---|---|
| Fan Size | No Fans |
| Color | Blue |
The kit contains one ATX 24-pin, two PCI-E 8-pin and one CPU 8-pin extension, each 300 mm long, plus cable combs; no additional connectors are required for typical ATX, GPU and EPS power.
Only the 300 mm length is offered in this kit, so it is the sole option for routing from the power supply to motherboard and graphics card in most mid-tower layouts.
18 AWG conductors with 3 mm diameter carry the full ATX, PCI-E and EPS current specified for each connector, ensuring stable power without voltage drop over the 300 mm run.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?