We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular silver ATX power supply with fully modular cable sockets and a 120mm fan grille

GIGABYTE

GIGABYTE GP-UD850GM-A PG5 850 W fully modular ATX 3.1 power supply

SKU CH-7GDR-FPH7P MPN GP-UD850GM-A PG5

Fully modular 850 W ATX 3.1 unit with 80 PLUS Gold efficiency, Japanese capacitors, a 120 mm hydraulic bearing fan and native 16-pin PCIe 5.0 cable

  • TypeATX 3.1
  • Maximum Power850 W
  • Fans120mm Hydraulic Bearing Fan
  • +12V RailsSingle
  • ModularFull Modular
  • Energy-Efficient80 PLUS GOLD Certified
  • 850 W single +12V rail powers demanding builds
  • 80 PLUS Gold certified for 80%+ efficiency at typical loads
  • Fully modular cabling keeps the case tidy
  • 120 mm hydraulic bearing fan with smart switch runs quietly
  • ATX 3.1 and PCIe Gen 5.0 ready with native 16-pin cable for 600 W GPU support

850 W ATX 3.1 power supply

This fully modular unit delivers 850 W from a single +12 V rail and carries 80 PLUS Gold certification. It is built with 100 % Japanese capacitors and a 120 mm hydraulic bearing fan that includes a smart fan switch. The compact 150 x 140 x 86 mm form factor fits standard ATX cases while leaving cable routing clean.

ATX 3.1 and PCIe Gen 5.0 ready replacement

It replaces older ATX 2.x units that cannot meet the new excursion rules. The supply sustains up to 3 times the GPU power and 2 times total power for brief spikes, and it hits 70 % efficiency at low loads. A native 16 pin cable is included for direct connection to modern graphics cards.

600 W GPU headroom on a single rail

The single +12 V rail can feed a graphics card drawing up to 600 W through the 16 pin connector while still powering the rest of the system. Six protection circuits (OVP, OPP, SCP, UVP, OCP, OTP) guard the output. Builds with multiple high-wattage GPUs or extreme overclocking headroom will exceed the 850 W limit.

Highlights

  • 850 W single +12V rail powers demanding builds
  • 80 PLUS Gold certified for 80%+ efficiency at typical loads
  • Fully modular cabling keeps the case tidy
  • 120 mm hydraulic bearing fan with smart switch runs quietly
  • ATX 3.1 and PCIe Gen 5.0 ready with native 16-pin cable for 600 W GPU support

Specifications

BrandGIGABYTE
ModelGP-UD850GM-A PG5
TypeATX 3.1
Maximum Power850 W
Fans120mm Hydraulic Bearing Fan
+12V RailsSingle
ModularFull Modular
Energy-Efficient80 PLUS GOLD Certified
ProtectionOVP/OPP/SCP/UVP/OCP/OTP
Dimensions150x140x86(mm)
Package Content315.5x206x117(mm)
Shipping weight3.11 kg
Package size318 × 203 × 127 mm

Questions about this item

Will the 150 mm depth fit my ATX case?

The unit is 150 mm deep, 140 mm wide and 86 mm high, so it fits any standard ATX chassis with at least 150 mm PSU clearance.

How do I connect the 16-pin cable for a PCIe Gen 5.0 graphics card?

Plug the native 16-pin cable directly into the GPU; no adapter is needed, and the fully modular board lets you leave unused cables out of the case.

When should I clean or replace the 120 mm hydraulic bearing fan?

Vacuum the fan intake every six to twelve months; the hydraulic bearing is rated for long life, but replace the fan if noise or vibration appears.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.