We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black dual-fan graphics card with silver backplate, two-slot ATX form factor

GIGABYTE

GIGABYTE GV-N2070WF2-8GD Rev3 GeForce RTX 2070 graphics card

SKU CH-7SXH-MSXJZ MPN GV-N2070WF2-8GD Rev3

Refurbished GeForce RTX 2070 with 8GB GDDR6, WINDFORCE 2X dual-fan cooling and four-display outputs

  • InterfacePCI Express 3.0 x16
  • Chipset ManufacturerNVIDIA
  • GPU SeriesNVIDIA GeForce RTX 20 Series
  • GPUGeForce RTX 2070
  • Core Clock1620 MHz
  • CUDA Cores2304
  • GeForce RTX 2070 GPU with 2304 CUDA cores for real-time ray tracing and AI rendering
  • 8 GB GDDR6 memory on a 256-bit bus at 14000 MHz effective clock for high bandwidth
  • WINDFORCE 2X cooler with 100 mm alternate-spinning fans and back-plate for lower temperatures
  • 1 HDMI 2.0b and 3 DisplayPort 1.4 outputs driving up to four 7680 x 4320 @ 60 Hz displays
  • PCIe 3.0 x16 interface with 225 W TDP and 550 W recommended PSU for straightforward system integration

GIGABYTE RTX 2070 8GB WINDFORCE

This refurbished graphics card uses the NVIDIA GeForce RTX 2070 GPU with 2304 CUDA cores and a 1620 MHz core clock. It carries 8GB of GDDR6 memory across a 256-bit interface running at an effective 14000 MHz. The board supports up to four displays via one HDMI 2.0b port and three DisplayPort 1.4 connectors. It is aimed at gamers and creators who need ray-tracing capability at 1440p.

PCIe 3.0 x16 slot and 550W PSU

Verify that your motherboard has a free PCI Express 3.0 x16 slot and that your chassis can accept a 265 mm long dual-slot card measuring 10.43 by 4.75 inches. The card draws power from a single 8-pin connector and the manufacturer recommends a 550W power supply. Ensure your PSU provides the required connector and sufficient headroom for the rest of the system.

WINDFORCE 2X cooling and 225W TDP

The WINDFORCE 2X cooler uses two 100mm alternate-spinning fans and a metal back plate to manage the 225W thermal design power. In typical gaming loads the fans ramp up gradually, keeping the GPU near its boost clock while noise remains moderate. Power draw stays close to the rated TDP, so case airflow should be adequate to exhaust the heat from the two-slot bracket.

Highlights

  • GeForce RTX 2070 GPU with 2304 CUDA cores for real-time ray tracing and AI rendering
  • 8 GB GDDR6 memory on a 256-bit bus at 14000 MHz effective clock for high bandwidth
  • WINDFORCE 2X cooler with 100 mm alternate-spinning fans and back-plate for lower temperatures
  • 1 HDMI 2.0b and 3 DisplayPort 1.4 outputs driving up to four 7680 x 4320 @ 60 Hz displays
  • PCIe 3.0 x16 interface with 225 W TDP and 550 W recommended PSU for straightforward system integration

Specifications

BrandGIGABYTE
ModelGV-N2070WF2-8GD Rev 3.0
InterfacePCI Express 3.0 x16
Chipset ManufacturerNVIDIA
GPU SeriesNVIDIA GeForce RTX 20 Series
GPUGeForce RTX 2070
Core Clock1620 MHz
CUDA Cores2304
Effective Memory Clock14000 MHz
Memory Size8GB
Memory Interface256-Bit
Memory TypeGDDR6
DirectXDirectX 12
OpenGLOpenGL 4.6
Multi-Monitor Support4
HDMI1 x HDMI 2.0b
DisplayPort3 x DisplayPort 1.4
ColorBlack
Max Resolution7680 x 4320 @ 60 Hz
SLI SupportNo
Virtual Reality ReadyYes
CoolerWINDFORCE 2X
Thermal Design Power225W
System RequirementsRecommended PSU: 550W
Recommended PSU Wattage550W
Power Connector8-Pin
FeaturesPowered by GeForce RTX 2070
Integrated with 8GB GDDR6 256-bit memory interface
WINDFORCE 2X Cooling System with alternate spinning fans
100mm unique blade fans
Protection Back Plate
Form FactorATX
Max GPU Length265 mm
Card Dimensions (L x H)10.43" x 4.75"
Slot Width2 Slots
Shipping weight0.96 kg
Package size353 × 236 × 58 mm

Questions about this item

Does the GV-N2070WF2-8GD Rev3 include any power cables or adapters in the box?

The card is sold as a standalone unit. You will need a power supply with an 8-pin PCIe connector and at least 550W capacity, plus a motherboard with a PCI Express 3.0 x16 slot.

Are there multiple memory or clock versions of the GV-N2070WF2-8GD Rev3 to choose from?

This model is a single SKU with 8GB GDDR6 on a 256-bit bus, a 1620 MHz core clock and 14000 MHz effective memory clock. No alternative capacities or factory-overclocked variants exist for this part number.

What does the 1620 MHz core clock actually deliver in a working system?

The 1620 MHz boost clock drives the 2304 CUDA cores through the 256-bit GDDR6 interface, enabling 7680 x 4320 output at 60 Hz across four displays via one HDMI 2.0b and three DisplayPort 1.4 ports, within a 225W power envelope.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.