Gigastone Corporation U5200-16GBX2-GST-HB 32GB (2x16GB) DDR5-5200 CL40 Black desktop RAM
- 32GB (2 x 16GB)
- 288-Pin DDR5 SDRAM
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Gigastone Corporation
Dual-channel 16 GB DDR5 kit running at 5600 MHz with CL40 timing, Intel XMP 3.0 support, black heat spreaders and RGB lighting
Capacity 16GB (2 x8GB)
RGB Y
This 16 GB kit contains two 8 GB DDR5 UDIMM modules designed for desktop gaming PCs. Each stick runs at 5600 MHz with a tested latency of CL40 and operates at 1.25 V. The modules use a 288-pin layout and are built with major-brand chips for broad platform compatibility.
Installation follows the standard DDR5 UDIMM procedure: align the notch, press firmly until the retention clips click, then enable the XMP 3.0 profile in BIOS to reach the rated 5600 MHz speed. The most common issue is leaving the kit at the default JEDEC speed because the XMP profile was not activated after seating the modules.
Under continuous workloads the CL40 40-40-40-77 timings and 1.25 V voltage remain stable thanks to the integrated black heat spreader. The dual-channel configuration maintains the full 5600 MHz data rate during extended gaming or rendering sessions without throttling.
| Brand | Gigastone |
|---|---|
| Series | U5600-8GBX2-GSTHB-RGB |
| Model | U5600-8GBX2-GSTHB-RGB |
| Part Number | GS-D5-U5600-8GBX2-GSTHB-RGB-B |
| Capacity | 16GB (2 x 8GB) |
| Type | 288-Pin DDR5 SDRAM |
| Speed | DDR5 5600 (PC5 44800) |
| Tested Frequency | 5600 |
| CAS Latency | CL40 |
| Timing | 40-40-40-77 |
| Tested Timing | 40-40-40-77 |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Dual Channel Kit |
| Chipset | Major Brand Chipset |
| BIOS/Performance Profile | Intel XMP 3.0 |
| Color | Black |
| Heat Spreader | Yes |
| Features | [CAPACITY] 16GB (2x8GB Module), Type: DDR5 UDIMM Memory RAM for Desktop, PC. Designed for Gaming PC [SPEC] DDR5 5600MHz (PC5-44800) ECC type: Non ECC, Unbuffered DIMM, Voltage: 1.25V, Pin Count: 288 Pin [OVER CLOCKING] Automated Over Clocking to 5600MHz (Optimized for XMP 3.0) [Caution] Before you make your purchase, please check your computer motherboard model/RAM model/RAM slot/RAM frequency/maximum compatible memory capacity. [Support] 5-Year warranty and instant online service |
| Recommend Use | AMD & Intel Compatible |
| LED Color | RGB |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
Yes, the kit supports Intel XMP 3.0 so a compatible motherboard can load the 5600 MHz profile automatically.
Yes, 1.25 V is the standard voltage for DDR5 UDIMM modules and works with any motherboard that follows the DDR5 specification.
Confirm the board has two free DDR5 DIMM slots, supports 5600 MHz or higher memory speed, and accepts a total capacity of at least 16 GB.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?