Goldshell Mini-DOGE III 700 MH/s 400W mining hardware

Scrypt mining hardware for Litecoin and Dogecoin

The Goldshell Mini-DOGE III is a dedicated Scrypt miner built to process Litecoin and Dogecoin blocks. It delivers a maximum hashrate of 700Mh/s while drawing 400W from the wall. The unit measures 198 x 150 x 95mm and weighs 2100g, making it compact enough for a desktop or shelf. A single fan keeps the chassis at 35db during operation.

Ethernet interface and power envelope

The miner connects to the pool over a wired Ethernet link, so a stable LAN port and router are required. Its 400W draw means the host circuit must supply continuous power at that level without sag. The 35db noise floor is low enough for an office or home room, but the single fan still moves measurable air. No wireless or alternative network options are provided.

Hashrate ceiling and thermal headroom

At 700Mh/s the device sits at a fixed performance point; there is no overclocking headroom quoted by the manufacturer. The 400W power figure represents the upper bound for both electricity cost calculations and cooling capacity. The 35db acoustic rating holds only while the single fan runs at its stock curve; higher ambient temperatures will push the fan harder and raise the noise level.