We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Standard ATX power supply, matte black metal enclosure, single rear fan, reduced depth design

Gulfe

Gulfe ATX Power Supply for Gateway GT3084M GT3226M

SKU CH-EBYE-M59SD

ATX power supply with reduced depth for Gateway GT3084M and GT3226M systems

  • TypeATX
  • Fans1
  • Weight2.5
  • Direct replacement for Gateway GT3084M and GT3226M systems
  • Reduced depth design fits tight chassis spaces at 5.9 inches height
  • ATX 24-pin, P4 4-pin, three SATA, two LP4 and one floppy connector
  • Over-current and over-power protection safeguards connected components
  • Hi-pot tested with low ripple and noise for stable operation

Direct replacement for Gateway desktops

This Gulfe ATX power supply is built to replace the original units in Gateway GT3084M and GT3226M systems. It matches the required connector layout and reduced-depth form factor. The unit is new and weighs 2.5 kg.

Fits tight chassis with standard ATX connectors

Reduced depth of 5.86 inches by 3.3 inches increases compatibility with smaller cases. A single 24-pin ATX connector, one 4-pin P4-12V, three SATA 15-pin, two LP4 4-pin and one floppy 4-pin connector cover legacy and current drives. Builders needing more SATA or PCIe power connections will need a different unit.

Single fan with protection circuits

One fan provides cooling while over-current and over-power protection safeguards components. Input voltage accepts 115 V or 230 V at 47 to 63 Hz. Hold-up time is 17 ms minimum and rise time is less than 70 ms. High-efficiency design keeps ripple and noise low during normal operation.

Highlights

  • Direct replacement for Gateway GT3084M and GT3226M systems
  • Reduced depth design fits tight chassis spaces at 5.9 inches height
  • ATX 24-pin, P4 4-pin, three SATA, two LP4 and one floppy connector
  • Over-current and over-power protection safeguards connected components
  • Hi-pot tested with low ripple and noise for stable operation

Specifications

BrandGulfe
TypeATX
Fans1
Weight2.5

Questions about this item

How long can the 17 ms hold-up time keep the system running during a brief power loss?

The unit provides a minimum hold-up time of 17 ms at nominal input, giving the motherboard enough ride-through for short mains interruptions.

What is the fan noise and heat output when the supply runs continuously at full load?

A single internal fan handles cooling; the supply is hi-pot tested for low ripple and noise, and includes over-current and over-power protection to limit temperature rise.

Which motherboard power connectors must already be present on the board for this unit to work?

The PSU supplies one 24-pin ATX (20+4) connector and one 4-pin P4 12 V connector, so the board needs both sockets.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.