We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Gulfe ATX power supply unit, black metal casing, single fan, standard connector layout

Gulfe

Gulfe ATX power supply for HP Pavilion H8 1060SC 1061SC 1062SC

SKU CH-QGSH-28CQZ

Replacement ATX power supply for HP Pavilion H8 1060SC 1061SC 1062SC with reduced depth, over-current protection and 24-pin, 4-pin, SATA and LP4 connectors

  • TypeATX
  • Fans1
  • Weight2.5
  • Replaces legacy HP Pavilion H8 1060SC 1061SC 1062SC power supplies
  • Reduced depth 5.9" height 3.4" width fits tight cases
  • Over current and over power protection safeguards components
  • High efficiency low ripple noise delivers stable voltage
  • Connectors include 24 pin ATX 4 pin P4 3 SATA 2 LP4 1 floppy

Direct replacement for HP Pavilion H8 series

This ATX power supply is built as a direct replacement for the HP Pavilion Desktop H8 1060SC 1061SC 1062SC models. It matches the original form factor with reduced depth dimensions of 5.86 inches by 3.3 inches for increased compatibility. The unit weighs 2.5 units and includes a single fan for cooling. It is intended for owners restoring or maintaining these specific legacy desktops.

Upgrades aging original units

This supply replaces several older legacy power supply units that may have degraded over time. It adds over current and over power protection that earlier designs often lacked. The jump is worth it when the original unit fails, shows voltage instability, or cannot sustain the system under load. It supports input voltages of 115 / 230 V across 47 to 63 Hz. Builders needing higher wattage for added graphics cards or extra drives should look elsewhere.

Steady output with validated hold-up and ripple

High efficiency operation is backed by hi-pot testing and low ripple and noise specs. Rise time is less than 70 ms and hold-up time reaches a minimum of 17 ms at nominal input, ensuring the system rides through brief mains interruptions. The 24-pin ATX, 4-pin CPU, three SATA, two LP4 and one floppy connector deliver stable +5V, -5V, +12V1, +12V2, +3.3V, -12V and +5V-SB rails under sustained load. Systems requiring additional PCIe power connectors are not supported.

Highlights

  • Replaces legacy HP Pavilion H8 1060SC 1061SC 1062SC power supplies
  • Reduced depth 5.9" height 3.4" width fits tight cases
  • Over current and over power protection safeguards components
  • High efficiency low ripple noise delivers stable voltage
  • Connectors include 24 pin ATX 4 pin P4 3 SATA 2 LP4 1 floppy

Specifications

BrandGulfe
TypeATX
Fans1
Weight2.5

Questions about this item

What are the exact dimensions I need to clear inside my HP Pavilion H8 1060SC case?

The unit measures 5.86 inches deep by 3.3 inches wide, with a reduced-depth ATX profile of 5.9" height by 3.4" width for tighter chassis fit.

Which power connectors must I attach during installation, and which one is most often missed?

Connect the 24-pin ATX (20+4), the 4-pin P4-12V for the CPU, three SATA 15-pin drives, two LP4 4-pin peripherals and one floppy 4-pin; the P4-12V CPU plug is the step most builders forget.

What component will likely need attention first, and what should I watch for?

The single internal fan is the only moving part; plan to clean dust from its intake regularly and replace the unit if bearing noise appears or airflow drops.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.