HP ProLiant DL160 Gen9 1U rack server E5-2603v3 1.6GHz 6-core 32GB DDR4 2x 1TB SATA B140i
- Rack
- 1U
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
HP
1U rack server with Xeon E5-2623 v3, 64 GB DDR4, dual 1 TB SATA drives and B140i RAID
HDD 2 x 1TB
Struck-through versions exist but are not stocked here.
The HP ProLiant DL160 G9 fits a single Intel Xeon E5-2623 v3 quad-core processor at 3 GHz with 64 GB of DDR4 ECC registered memory across sixteen DIMM slots. Two 1 TB 7.2K SATA drives connect to the onboard B140i software RAID controller supporting levels 0, 1 and 5. A 550 W redundant hot-swap power supply and Matrox G200 graphics complete the configuration for cloud or general-purpose deployments.
Under continuous demand the installed Xeon E5-2623 v3 delivers four physical cores and eight threads at its base frequency, while DDR4 runs up to 2400 MT/s depending on processor capability. Memory capacity is capped at 64 GB with one CPU; adding a second supported processor would unlock the full 1 TB maximum and additional DIMM slots. The B140i controller handles SATA RAID without a dedicated hardware accelerator, so sustained write throughput follows the 7.2K drive limits.
The 1U chassis uses redundant 550 W hot-swap supplies to maintain uptime during a unit failure. Compact small-form-factor drive bays and the low-profile Matrox G200 keep airflow paths short, allowing the integrated fans to manage heat from the processor, memory and two spinning drives. Acoustic output scales with inlet temperature and workload intensity, while power draw tracks CPU utilisation and drive activity within the supply’s rated capacity.
| Brand | HP |
|---|---|
| Series | ProLiant |
| Model | Proliant DL160 G9 |
| Type | Rack |
| Rack Height | 1U |
| Redundant Hot-swap Power | Yes |
| CPU Type | Intel Xeon E5 v3 |
| MAX Processors | 2 |
| Chipset | Intel C610 |
| Installed Memory Size | 64GB |
| Memory Type | DDR4 |
| Max Memory Capacity | 64GB |
| Memory Features | 16 DIMM slots, 8 per processor. (4GB/8GB/16GB/32GB/64GB DDR4 up to 2400MT/s ECC Registered, actual memory speed dependent on the processor capability). |
| Number of Memory Slots | 16 |
| Storage Controller | B140i Software RAID |
| HDD Interface | SATA |
| SSD (Installed) | No |
| Raid Level | 0,1,5 |
| Media Drives | None |
| GPU Type | Matrox G200 |
| Video Memory | 16MB |
| Remote Management | iLO Management (standard). |
| LAN Ports | 2 x Ports |
| Expansion Slots | CPU1 PCIe Riser 1: 2 PCIe 3.0 Slots (1 & 2) available: 1x Full-Height Half Length, 1x Low Profile slot. Optional kit available to install Flexible LOM in slot 1. CPU 2 Riser (Optional): PCIe 3.0 slot 3 - Full-Height Half Height (Secondary PCIe Riser and dual CPU required). |
| Operating System | No |
| Compatible/Certified OS | Microsoft Windows Small Business Server 2011/2008, Microsoft Windows Server 2008 R2 SP1/SP2, Microsoft Windows HPC Server 2008 R2, Novell SUSE Linux Enterprise Server, Red Hat Enterprise Linux, Oracle Solaris |
| Weight | 63.0000LBS |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
The redundant 550W hot-swap power supplies feed the E5-2623 v3 processor and 64GB of DDR4 memory; actual draw depends on workload but the units are rated for 550W each.
The eight SFF bays accept standard 2.5-inch SATA drives; trays are included only with the two installed 1TB drives, so additional trays and SATA cables are required for extra drives.
The B140i controller supports SATA only, so SAS drives cannot be used on this controller; a dedicated SAS RAID card would be needed for SAS media.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?