HP ProLiant DL360 Gen9 1U rack server E5-2670 v3 12C 2.3GHz 64GB DDR4 2x 500GB SATA B140i
- Rack
- 1U
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
HP
2U rack server with a 12-core 2.3GHz Xeon, 128GB DDR4, B140i SATA RAID and eight 2.5-inch bays
The HP ProLiant DL380 G9 is a 2U rackmount server designed for data-centre workloads that need dense compute in a standard cabinet. It ships with a single Intel Xeon E5-2670v3 twelve-core processor running at 2.3GHz and 128GB of DDR4 ECC registered memory across 24 DIMM slots. The chassis supports up to two processors and a maximum of 128GB installed RAM, making it suited for virtualization hosts, database nodes or general-purpose application tiers that fit within the current memory ceiling.
Dual 500W hot-swap redundant power supplies share the load, so a single unit failure does not interrupt operation. The 2U form factor uses front-to-rear airflow tuned for rack density; fan speed ramps with inlet temperature and CPU utilisation, keeping acoustics appropriate for a server room rather than an office. Power draw scales with the active core count and memory population, allowing the platform to run typical enterprise workloads within the redundant supply envelope.
Two drive trays with screws are provided for the eight 2.5-inch SFF bays, but no drives are installed, so storage capacity and performance are entirely defined by the disks you add. The onboard B140i controller delivers software RAID 0, 1, 5 and 10 for SATA devices only; it does not support SAS or NVMe, limiting array options to SATA SSDs or HDDs. Basic video output comes from a Matrox G200eH2 chip with 16MB memory, sufficient for installation and remote console but not for graphical workloads. No operating system is included.
| Brand | HP |
|---|---|
| Series | ProLiant |
| Model | Proliant DL380 G9 |
| Type | Rack |
| Rack Height | 2U |
| Redundant Hot-swap Power | Yes |
| CPU Type | Intel Xeon E5 v3 |
| MAX Processors | 2 |
| Chipset | Intel C610 |
| Installed Memory Size | 128GB |
| Memory Type | DDR4 |
| Max Memory Capacity | 128GB |
| Memory Features | 24 DIMM slots, 12 per processor. (4GB/8GB/16GB/32GB/64GB DDR4 up to 2400MT/s ECC Registered, actual memory speed dependent on the processor capability). |
| Number of Memory Slots | 24 |
| Storage Controller | B140i Software RAID |
| SSD (Installed) | No |
| Raid Level | RAID 0/1/5/10 |
| Media Drives | None |
| GPU Type | Matrox G200eH2 |
| Video Memory | 16MB |
| Remote Management | iLO Management (standard). |
| LAN Ports | 4 x Ports |
| Expansion Slots | Primary Riser: 3 PCIe 3.0 Slots (1-3) available: 2x Full-Height Half Length, 1x Half-Lenth Full Height. Optional 3 additional slots (Slot 2 PCIe Riser and dual CPU required). |
| Operating System | No |
| Compatible/Certified OS | Microsoft Windows Small Business Server 2011/2008, Microsoft Windows Server 2008 R2 SP1/SP2, Microsoft Windows HPC Server 2008 R2, Novell SUSE Linux Enterprise Server, Red Hat Enterprise Linux, Oracle Solaris |
| Weight | 63.0000LBS |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
Slide each 2.5" drive into its tray with the screws provided, insert the tray until it clicks, then enable the B140i controller in BIOS before creating a RAID 0/1/5/10 volume.
The two 500 W hot-swap power supplies and system fans are the primary field-replaceable units; DDR4 DIMMs and the single E5-2670 v3 processor can also be swapped if a fault develops.
The B140i software RAID supports SATA drives only, so storage throughput and CPU utilisation will saturate before the 128 GB DDR4 memory or 12-core 2.3 GHz Xeon reach their ceiling.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?