We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green 240-pin DDR3 DIMM with black chips, 7.8 inches long

HPE

HPE 16GB 1600MHz DDR3 CL11 ECC Registered DIMM

SKU CH-EEPZ-6FW8G

16 GB DDR3 server module with ECC, registered buffering, CL11 latency and 1600 MHz speed

  • SpeedDDR3 SDRAM
  • CAS LatencyCL11
  • ECCECC
  • Buffered/RegisteredRegistered
  • 16 GB capacity expands server memory headroom
  • DDR3-1600 speed delivers 12800 MB/s bandwidth
  • ECC registered design corrects errors for data integrity
  • CL11 latency supports responsive multi-tasking workloads
  • 240-pin DIMM fits HP ProLiant DL385p Gen8 servers

HPE 16GB DDR3-1600 ECC Registered DIMM

This 16 GB DDR3 module operates at 1600 MHz with CL11 latency. It uses ECC registered signal processing for data integrity in server environments. The single DIMM uses a 240-pin interface and a dual-rank x4 organisation.

Suits HP ProLiant DL385p Gen8 servers needing ECC

Builders requiring unbuffered DIMMs or a different memory generation cannot use this module. Systems limited to lower densities or non-ECC memory should look elsewhere. The registered design also prevents use in platforms that accept only unbuffered sticks.

1600 MHz DDR3 speed with CL11 timing

The PC3-12800 rating confirms the 1600 MHz transfer rate and the CAS-11 latency. This single specification determines whether the module matches the server memory bus. Verify the platform requires DDR3-1600 registered ECC before purchase.

Highlights

  • 16 GB capacity expands server memory headroom
  • DDR3-1600 speed delivers 12800 MB/s bandwidth
  • ECC registered design corrects errors for data integrity
  • CL11 latency supports responsive multi-tasking workloads
  • 240-pin DIMM fits HP ProLiant DL385p Gen8 servers

Specifications

BrandHPE
SpeedDDR3 SDRAM
CAS LatencyCL11
ECCECC
Buffered/RegisteredRegistered

Questions about this item

What server DIMM slots does this 240-pin DDR3 module fit?

It fits 240-pin DDR3 DIMM slots in HP ProLiant DL385p Gen8 servers and other platforms that accept registered DDR3-1600 ECC memory.

What is the correct way to install this registered ECC DIMM, and what step is often missed?

Power down the server, open the chassis, align the notch on the 240-pin edge connector with the slot key, press firmly until both latches click, then verify in BIOS that the module registers at 1600 MHz with ECC active.

When should this 16 GB DDR3-1600 CL11 module be replaced?

Replace it if memory diagnostics report uncorrectable ECC errors, if the server fails to POST with the module seated, or if a capacity upgrade requires higher-density DIMMs.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.