We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular silver blade server module with front drive bays and connector edge

HPE

HPE BL460c G10 Blade Server 2x Xeon 5118 2.3GHz 32GB DDR4 2x 300GB SAS

SKU CH-P6PN-612MF

Dual Xeon 5118 blade server with 32 GB DDR4 and two 300 GB SAS drives for dense compute workloads

  • TypeBlade
  • CPU TypeIntel Xeon
  • CPU Speed2.3 GHz
  • # of Processors Installed2
  • MAX Processors2
  • Installed Memory Size32GB
  • Dual Xeon 5118 CPUs deliver 12 cores each at 2.3 GHz
  • 32 GB DDR4 ECC registered memory installed
  • 600 GB total SAS storage across two 300 GB drives
  • Smart Array P204i-b SR Gen10 controller manages RAID
  • Integrated iLO Advanced enables remote management

Blade server for virtualised workloads

The HPE BL460c G10 fits a standard c-Class enclosure and delivers two Xeon 5118 processors at 2.3 GHz with 12 cores each. Thirty-two gigabytes of DDR4 ECC registered memory support typical virtualisation density. Two 300 GB 10K SAS drives provide local boot and scratch space.

SAS drive bay and controller limits

Only two 2.5-inch drive bays are available so raw capacity tops out at 600 GB with the supplied drives. The Smart Array P204i-b SR controller handles RAID 0 and 1 only; parity RAID levels are not supported. Network connectivity relies on the installed FlexFabric 20 Gb two-port adapter.

Tool-less blade insertion and common pitfalls

The blade slides into the enclosure without tools once the enclosure firmware is current. A frequent issue is a version mismatch between the blade iLO 5 firmware and the Onboard Administrator causing the health LED to stay amber. Always update both sides before the first boot.

Highlights

  • Dual Xeon 5118 CPUs deliver 12 cores each at 2.3 GHz
  • 32 GB DDR4 ECC registered memory installed
  • 600 GB total SAS storage across two 300 GB drives
  • Smart Array P204i-b SR Gen10 controller manages RAID
  • Integrated iLO Advanced enables remote management

Specifications

BrandHP
SeriesProliant BL
ModelBlade
TypeBlade
CPU TypeIntel Xeon
CPU Speed2.3 GHz
# of Processors Installed2
MAX Processors2
Installed Memory Size32GB
Memory TypeDDR4 SDRAM
Max Memory Capacity128GB
Hard Drive (Installed)600,00
Storage ControllerHP Smart Array P204i-b SR Controller
HDD InterfaceSAS
GPU TypeIntegrated Graphics
Remote ManagementIntegrated Lights-Out (iLO) Advanced
Dimensions22 x 22x 10 in
Weight20

Questions about this item

Should I pick the 32 GB DDR4 configuration or upgrade toward the 128 GB maximum?

The server ships with 32 GB of DDR4 ECC registered memory installed and supports up to 128 GB total. Start with the factory 32 GB if your workload fits; add modules later when demand grows.

What does the 2.3 GHz Xeon 5118 speed deliver in this blade?

Two Xeon 5118 processors run at 2.3 GHz, each with 12 cores and 16.5 MB cache, giving strong multi-threaded throughput for virtualization, databases and general compute inside the BL460c G10.

How does the Smart Array P204i-b SR controller and SAS interface limit drive performance?

The P204i-b SR Gen10 controller manages the two 300 GB 10K SAS 2.5" drives over a SAS link, capping throughput at the controller and drive speeds rather than a faster bus.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.