HPE
HPE BL460c G10 Blade Server 2x Xeon Silver 4112 64GB DDR4 2x 1.8TB SAS
Dual Xeon Silver 4112 blade server with 64GB DDR4 and 2x 1.8TB SAS drives
- TypeBlade
- CPU TypeIntel Xeon
- CPU Speed2.6 GHz
- # of Processors Installed2
- MAX Processors2
- Installed Memory Size64GB
- Dual Xeon Silver 4112 at 2.6 GHz deliver 8 cores for compute
- 64 GB DDR4 memory supports virtualisation workloads up to 128 GB max
- 2 x 1.8 TB SAS drives on Smart Array P204i-b SR controller
- HPE iLO Advanced enables remote firmware updates and monitoring
- Compact 2.5" blade form factor fits dense 460-class enclosures
Dual Xeon Silver 4112 blade server
The HPE BL460c Gen10 is a half-height blade designed for dense compute clusters. Two Xeon Silver 4112 processors deliver eight cores at 2.6 GHz for virtualisation and database workloads. 64 GB of DDR4 ECC registered memory supports demanding multi-tenant environments. Integrated iLO Advanced enables remote firmware updates and power control across the enclosure.
Smart Array P204i-b with dual 1.8 TB SAS drives
The onboard Smart Array P204i-b SR controller manages two 2.5-inch 1.8 TB SAS hard drives in hardware RAID 0 or 1. FlexFabric 20 Gb dual-port adapter provides converged network and storage connectivity through the enclosure midplane. Hot-plug drive carriers allow replacement without shutting down the blade or the surrounding chassis.
Enclosure-cooled thermal design
Cooling is supplied by the shared enclosure fans, so the blade has no internal fan assembly and adds minimal acoustic load to the rack. Dual 4112 CPUs draw moderate power under typical virtualisation loads, leaving headroom in a fully populated chassis. iLO health monitoring reports inlet temperature and power consumption in real time for capacity planning.
Highlights
- Dual Xeon Silver 4112 at 2.6 GHz deliver 8 cores for compute
- 64 GB DDR4 memory supports virtualisation workloads up to 128 GB max
- 2 x 1.8 TB SAS drives on Smart Array P204i-b SR controller
- HPE iLO Advanced enables remote firmware updates and monitoring
- Compact 2.5" blade form factor fits dense 460-class enclosures
Specifications
| Brand | HP |
|---|---|
| Series | Proliant BL |
| Model | Blade |
| Type | Blade |
| CPU Type | Intel Xeon |
| CPU Speed | 2.6 GHz |
| # of Processors Installed | 2 |
| MAX Processors | 2 |
| Installed Memory Size | 64GB |
| Memory Type | DDR4 SDRAM |
| Max Memory Capacity | 128GB |
| Hard Drive (Installed) | 3,60 |
| Storage Controller | HP Smart Array P204i-b SR Controller |
| HDD Interface | SAS |
| GPU Type | Integrated Graphics |
| Remote Management | Integrated Lights-Out (iLO) Advanced |
| Dimensions | 22 x 22x 10 in |
| Weight | 20 |
Questions about this item
What SAS speed does the Smart Array P204i-b SR controller cap the 1.8TB drives at?
The P204i-b SR controller supports 12 Gb/s SAS, so the 1.8TB drives run at up to 12 Gb/s.
What chassis slot width does the BL460c G10 blade require?
The half-height blade fits a single half-height slot in any HPE c-Class enclosure.
How is the blade seated, and which step is most often missed?
Slide the blade into the enclosure until the ejector lever clicks, then lock the lever; many forget to engage the lever lock.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



