HPE
HPE DL360 Gen10 8SFF 2x Xeon Silver 4116 256GB DDR4 No Drive rack server
A 1U rack server with two Xeon Silver 4116 processors, 256GB DDR4 ECC memory, eight 2.5-inch SAS drive bays and a Smart Array P408 controller, sold without drives
- TypeRack
- CPU TypeIntel Xeon
- CPU Speed2.1GHz
- # of Processors Installed2
- MAX Processors2
- Installed Memory Size256GB
- Dual Xeon Silver 4116 processors deliver 24 cores at 2.1GHz
- 256GB DDR4 ECC registered memory supports large workloads
- Smart Array P408 SAS controller manages up to eight 2.5" drives
- Integrated Intel I350/X540 network card provides 2x 10GbE and 2x 1GbE ports
- HPE iLO Advanced remote management enables out-of-band server control
Dual Xeon Silver 4116 server for dense compute
The HPE DL360 Gen10 8SFF arrives with two Xeon Silver 4116 processors running at 2.1 GHz, each delivering 12 cores and 16.5 MB cache. 256 GB of DDR4 ECC registered memory fills the DIMM slots, and the Smart Array P408 SAS controller manages up to eight 2.5-inch drive bays. Integrated graphics and dual 500 W Flex Slot supplies complete the 1U chassis.
Upgrades from single-socket or lower-core platforms
Moving from a single-processor system or a four- to eight-core Xeon doubles thread count and memory channels, which benefits virtualisation hosts, database nodes and high-frequency trading workloads. The jump is worth it when licensing costs scale per socket and the 24 combined cores keep core-count licensing efficient. Buyers who need more than 3 TB of RAM or more than two sockets cannot use this platform.
Sustained load behaviour with dual 500 W supplies
Under continuous multi-threaded load the twin Xeon Silver 4116 CPUs maintain 2.1 GHz across all 24 cores, while the P408 controller sustains SAS throughput without thermal throttling. iLO Advanced provides remote power cycling and sensor logging during extended runs. The 1U airflow path relies on front-to-rear cooling; operators must ensure rack inlet temperatures stay within specification.
Highlights
- Dual Xeon Silver 4116 processors deliver 24 cores at 2.1GHz
- 256GB DDR4 ECC registered memory supports large workloads
- Smart Array P408 SAS controller manages up to eight 2.5" drives
- Integrated Intel I350/X540 network card provides 2x 10GbE and 2x 1GbE ports
- HPE iLO Advanced remote management enables out-of-band server control
Specifications
| Brand | HP |
|---|---|
| Series | ProLiant |
| Model | Rack Mount |
| Type | Rack |
| CPU Type | Intel Xeon |
| CPU Speed | 2.1GHz |
| # of Processors Installed | 2 |
| MAX Processors | 2 |
| Installed Memory Size | 256GB |
| Memory Type | DDR4 |
| Max Memory Capacity | 3TB |
| Hard Drive (Installed) | 3,60 |
| Storage Controller | HPE Smart Array P408 SAS Controller |
| HDD Interface | SAS |
| GPU Type | Integrated Graphics |
| Remote Management | HPE iLO Advanced |
| Dimensions | 36 x 24 x 10 in |
| Weight | 40 |
Questions about this item
What rack depth is required for the 36 in long chassis?
The chassis measures 36 inches deep, so the rack must provide at least that much clear depth plus cable room.
How are the two 500 W flex-slot power supplies installed, and what step is often missed?
Slide each supply into the rear bays until the latch clicks, then seat both IEC cables; the step often missed is engaging the redundant-mode jumper on the backplane.
When will the DDR4 ECC registered memory need replacement?
DDR4 ECC registered modules typically run for years; plan replacement only if iLO reports correctable errors or a DIMM fails POST.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
