HPE
HPE DL360 Gen9 4LFF 2x Xeon E5-2680v4 512GB DDR4 rack server
A 1U rack server with dual 14-core Xeon processors at 2.4GHz, 512GB DDR4 memory, and a P440 SAS controller supporting four 3.5-inch drive bays
- TypeRack
- CPU TypeIntel Xeon
- CPU Speed2.4GHz
- # of Processors Installed2
- MAX Processors2
- Installed Memory Size512GB
- Dual 14-core Xeon processors at 2.4GHz deliver high multi-thread throughput
- 512GB DDR4 ECC memory supports large virtualisation workloads
- Four 3.5-inch drive bays with P440 SAS controller enable flexible storage arrays
- Dual 10GbE and 1GbE ports provide high-speed network connectivity
- HPE iLO Advanced remote management allows full out-of-band server control
Ready-to-deploy compute platform
The HPE DL360 Gen9 4LFF server arrives new with two Intel Xeon E5-2680v4 processors running at 2.4 GHz, each delivering 14 cores and 35 MB cache. 512 GB of DDR4 ECC registered memory is installed across the DIMM slots, leaving headroom up to the 768 GB maximum. An HPE Smart Array P440 SAS controller manages up to four 3.5-inch SATA drive bays, while dual 500 W flex-slot power supplies and HPE iLO Advanced remote management are fitted as standard.
Suited for memory-heavy workloads
This configuration targets virtualisation hosts, database nodes and compute clusters that benefit from high core counts and large DDR4 capacity. The four-bay LFF chassis limits internal storage density, so buyers who need many drives or all-flash arrays should consider a different chassis. Workloads requiring dedicated GPU acceleration or more than two processor sockets are also outside the scope of this unit.
512 GB DDR4 ECC registered memory installed
The single specification that decides fit is the pre-installed 512 GB DDR4 ECC registered memory, expandable to 768 GB. Confirm your application's memory footprint and DDR4 compatibility before ordering, because the platform does not support other memory generations and the installed capacity cannot be reduced.
Highlights
- Dual 14-core Xeon processors at 2.4GHz deliver high multi-thread throughput
- 512GB DDR4 ECC memory supports large virtualisation workloads
- Four 3.5-inch drive bays with P440 SAS controller enable flexible storage arrays
- Dual 10GbE and 1GbE ports provide high-speed network connectivity
- HPE iLO Advanced remote management allows full out-of-band server control
Specifications
| Brand | HP |
|---|---|
| Series | ProLiant |
| Model | Rack Mount |
| Type | Rack |
| CPU Type | Intel Xeon |
| CPU Speed | 2.4GHz |
| # of Processors Installed | 2 |
| MAX Processors | 2 |
| Installed Memory Size | 512GB |
| Memory Type | DDR4 |
| Max Memory Capacity | 768GB |
| Hard Drive (Installed) | 4,00 |
| Storage Controller | HPE Smart Array P440 SAS Controller |
| HDD Interface | SATA |
| GPU Type | Integrated Graphics |
| Remote Management | HPE iLO Advanced |
| Dimensions | 36 x 24 x 10 in |
| Weight | 40 |
Questions about this item
What rack dimensions and weight must my cabinet accommodate for this DL360 Gen9?
The server measures 36 in deep by 24 in wide by 10 in high and weighs 40 lb, so the rack must accept that depth and weight.
Will the P440 controller recognise the SATA drives I already own?
Yes, the installed P440 SAS controller supports SATA drives, so your existing SATA HDDs or SSDs can be used in the four 3.5 in bays.
How can I confirm both Xeon E5-2680v4 processors and all 512 GB of DDR4 are active after power-on?
Check the iLO interface or POST screen; it will show 2 processors, 14 cores each at 2.4 GHz, and 512 GB DDR4 memory detected.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
HPE
HPE P22020B21 2U Cable Management Arm for DL38X Gen10 Plus Rail Kit
$52.99$67.99−22%
0.00067416BTC
In stock
Lenovo
Lenovo ThinkSystem ST250 V3 7DCEA01YNA Tower Server Xeon E-2434 16 GB RAM
$1,267.99
0.01613178BTC
In stock