We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver rack-mount server, 1U height, four 3.5-inch drive bays visible

HPE

HPE DL360 Gen9 4LFF 2x Xeon E5-2699v4 384GB DDR4 rack server

SKU CH-HWTN-WTDK7

A 1U rack server with dual Xeon E5-2699v4 CPUs, 384GB DDR4 ECC memory and a P440 SAS controller supporting four 3.5-inch SATA bays

  • TypeRack
  • CPU TypeIntel Xeon
  • CPU Speed2.2GHz
  • # of Processors Installed2
  • MAX Processors2
  • Installed Memory Size384GB
  • Dual Xeon E5-2699 v4 CPUs deliver 44 cores at 2.2 GHz
  • 384 GB DDR4 ECC memory supports large virtualised workloads
  • HPE Smart Array P440 SAS controller manages up to four 3.5" drives
  • Dual 10 GbE and 1 GbE ports provide high-throughput networking
  • Redundant 500 W Flex Slot power supplies ensure continuous operation

Dense compute in a 1U chassis

This HPE ProLiant DL360 Gen9 server delivers 44 cores and 384 GB of DDR4 ECC memory in a single rack unit. Two Xeon E5-2699 v4 processors run at 2.2 GHz with 55 MB cache each, suited for virtualization hosts or database nodes that value core density. The 4 LFF drive bays accept 3.5" SATA drives behind a Smart Array P440 SAS controller. Integrated graphics and iLO Advanced remote management complete the base configuration.

Fits scale-up workloads that stay within two sockets

The platform maxes out at two processors and 768 GB of memory, so clusters that plan to grow beyond that ceiling will need a different chassis. Buyers who require PCIe flash storage or more than four 3.5" bays should evaluate other form factors. The included dual 500 W power supplies and 10 GbE networking cover typical redundancy needs without extra parts.

384 GB DDR4 ECC registered memory installed

This capacity uses 24 DIMM slots across both CPUs and leaves room to reach the 768 GB maximum. DDR4 is the only supported memory type; other generations will not fit. Matching the installed speed and rank configuration is essential when adding modules.

Highlights

  • Dual Xeon E5-2699 v4 CPUs deliver 44 cores at 2.2 GHz
  • 384 GB DDR4 ECC memory supports large virtualised workloads
  • HPE Smart Array P440 SAS controller manages up to four 3.5" drives
  • Dual 10 GbE and 1 GbE ports provide high-throughput networking
  • Redundant 500 W Flex Slot power supplies ensure continuous operation

Specifications

BrandHP
SeriesProLiant
ModelRack Mount
TypeRack
CPU TypeIntel Xeon
CPU Speed2.2GHz
# of Processors Installed2
MAX Processors2
Installed Memory Size384GB
Memory TypeDDR4
Max Memory Capacity768GB
Hard Drive (Installed)2,00
Storage ControllerHPE Smart Array P440 SAS Controller
HDD InterfaceSATA
GPU TypeIntegrated Graphics
Remote ManagementHPE iLO Advanced
Dimensions36 x 24 x 10 in
Weight40

Questions about this item

What rack depth does the 36-inch deep DL360 Gen9 chassis require?

The chassis is 36 inches deep, so a standard 42-inch or deeper rack provides enough clearance for cable routing and airflow at the rear.

How do you seat the two Xeon E5-2699 v4 processors and 384 GB of DDR4 ECC registered DIMMs during initial setup?

Open the top cover, lift the CPU socket levers, align each processor using the notches, close the levers, then populate the memory slots following the board's population guide until all 384 GB are installed.

When should the 500 W Flex Slot power supplies be replaced in a redundant pair?

Replace a unit when iLO reports a power-supply fault, the amber LED stays lit, or the server logs show repeated AC-loss or over-temperature events for that module.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.