HPE
HPE DL360 Gen9 4LFF Xeon E5-2699v4 384GB DDR4 rack server
A 1U rack server with four 3.5" drive bays, one 22-core Xeon at 2.2GHz and 384GB DDR4 ECC memory
- TypeRack
- CPU TypeIntel Xeon
- CPU Speed2.2GHz
- # of Processors Installed1
- MAX Processors2
- Installed Memory Size384GB
- Single Intel Xeon E5-2699 v4 with 22 cores at 2.2 GHz
- 384 GB DDR4 ECC registered memory installed
- HPE Smart Array P440 SAS controller supports RAID
- HPE iLO Advanced remote management included
- 4 LFF 3.5-inch drive bays ready for SATA storage
HPE DL360 Gen9 4LFF server
The HPE DL360 Gen9 4LFF rack server ships with one Intel Xeon E5-2699 v4 processor running at 2.2 GHz and 384 GB of DDR4 ECC registered memory. It targets organisations that need dense compute and large memory capacity in a 1U form factor. The chassis supports up to four 3.5-inch drive bays and a second processor for future expansion. Buyers who need internal storage out of the box should look elsewhere.
Thermals noise and power
Two 500 W Flex Slot power supplies deliver redundant power for the installed CPU and memory configuration. The 1U rack design relies on high-speed system fans to move air across the processor heatsinks and memory modules under load. Acoustic output in a typical data-centre aisle is consistent with other 1U dual-socket platforms. No GPU or additional add-in cards are installed, so power draw remains within the supply rating.
Memory capacity and expandability
The system arrives with 384 GB of DDR4 memory installed across the available DIMM slots on the first processor. Maximum supported capacity is 768 GB when both processor sockets are populated. The HPE Smart Array P440 SAS controller manages the SATA drive bays and provides hardware RAID for attached storage. Remote administration is handled by HPE iLO Advanced for out-of-band management.
Highlights
- Single Intel Xeon E5-2699 v4 with 22 cores at 2.2 GHz
- 384 GB DDR4 ECC registered memory installed
- HPE Smart Array P440 SAS controller supports RAID
- HPE iLO Advanced remote management included
- 4 LFF 3.5-inch drive bays ready for SATA storage
Specifications
| Brand | HP |
|---|---|
| Series | ProLiant |
| Model | Rack Mount |
| Type | Rack |
| CPU Type | Intel Xeon |
| CPU Speed | 2.2GHz |
| # of Processors Installed | 1 |
| MAX Processors | 2 |
| Installed Memory Size | 384GB |
| Memory Type | DDR4 |
| Max Memory Capacity | 768GB |
| Hard Drive (Installed) | 2,00 |
| Storage Controller | HPE Smart Array P440 SAS Controller |
| HDD Interface | SATA |
| GPU Type | Integrated Graphics |
| Remote Management | HPE iLO Advanced |
| Dimensions | 36 x 24 x 10 in |
| Weight | 40 |
Questions about this item
How do I install the Xeon E5-2699v4 into this server, and what step is often missed?
Align the processor notches with the socket keys, lower the retention lever fully until it clicks, then attach the heatsink using the integrated captive screws in a diagonal sequence to ensure even pressure across the 22-core die.
What maintenance will the 384GB DDR4 memory configuration require over time?
Run the HPE Smart Memory health checks via iLO Advanced quarterly; the system will flag correctable ECC errors before they become uncorrectable, letting you schedule a single DIMM replacement without downtime.
Which limit appears first when the P440 controller drives four 3.5-inch SATA bays under sustained write load?
The P440's 500 MB/s SAS 3.0 x8 host link saturates before the individual SATA 6 Gbps ports, so aggregate throughput caps at the controller interface rather than the drive media.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



