HPE
HPE DL380 Gen9 4LFF 2x Xeon E5-2620 v3 384GB DDR4 rack server
A 2U rack server holding four 3.5″ drives, dual 2.4 GHz Xeon processors and 384 GB DDR4 ECC memory
- TypeRack
- CPU TypeIntel Xeon
- CPU Speed2.4GHz
- # of Processors Installed2
- MAX Processors2
- Installed Memory Size384GB
- Dual Xeon E5-2620 v3 CPUs provide 2.4 GHz base frequency for consistent compute
- 384 GB DDR4 ECC registered memory supports large virtualisation deployments
- HPE Smart Array P440 SAS controller enables RAID across four 3.5-inch drive bays
- HPE iLO Advanced remote management allows out-of-band server control
- Dual 500 W Flex Slot power supplies deliver redundant power for uptime
HPE DL380 Gen9 4LFF chassis
The HPE DL380 Gen9 4LFF chassis is a 2U rack server built for organisations that need dense compute and large memory capacity in a standard rack footprint. It suits virtualisation hosts, database nodes and internal cloud workloads that benefit from dual-socket performance and flexible storage bays. Buyers who need GPU acceleration or more than four 3.5-inch drive bays should look elsewhere.
Thermals noise and dual 500 W supplies
Two 500 W Flex Slot power supplies share the load and provide redundancy for the dual Xeon E5-2620 v3 processors running at 2.4 GHz. The chassis airflow design keeps CPU temperatures stable under typical virtualisation loads while fan speeds remain within data-centre noise expectations. Power draw scales with memory population and drive count, so actual consumption will vary by configuration.
iLO Advanced and P440 controller
HPE iLO Advanced enables remote console, virtual media and health monitoring without an on-site presence, reducing admin travel for distributed sites. The Smart Array P440 SAS controller manages RAID across SATA or SAS drives installed in the four 3.5-inch bays, offloading parity calculations from the CPUs. Rail kits are available on request to simplify rack mounting.
Highlights
- Dual Xeon E5-2620 v3 CPUs provide 2.4 GHz base frequency for consistent compute
- 384 GB DDR4 ECC registered memory supports large virtualisation deployments
- HPE Smart Array P440 SAS controller enables RAID across four 3.5-inch drive bays
- HPE iLO Advanced remote management allows out-of-band server control
- Dual 500 W Flex Slot power supplies deliver redundant power for uptime
Specifications
| Brand | HP |
|---|---|
| Series | ProLiant |
| Model | Rack Mount |
| Type | Rack |
| CPU Type | Intel Xeon |
| CPU Speed | 2.4GHz |
| # of Processors Installed | 2 |
| MAX Processors | 2 |
| Installed Memory Size | 384GB |
| Memory Type | DDR4 |
| Max Memory Capacity | 3TB |
| Hard Drive (Installed) | 32,00 |
| Storage Controller | HPE Smart Array P440 SAS Controller |
| HDD Interface | SATA |
| GPU Type | Integrated Graphics |
| Remote Management | HPE iLO Advanced |
| Dimensions | 36 x 24 x 10 in |
| Weight | 40 |
Questions about this item
How do I mount the 36 x 24 x 10 in chassis in a standard rack, and what step is often missed?
Use the rail kit (available on request) to secure the 40 lb unit; the step often missed is engaging both the front and rear rail locks before sliding the server fully home.
Which components will need replacement first during long-term operation?
The two 500 W Flex Slot power supplies and system fans are the primary field-replaceable units that wear over time; DDR4 ECC memory and the P440 controller rarely require replacement.
What performance limit appears first when both Xeon E5-2620 v3 CPUs run at 2.4 GHz continuously?
The dual 500 W power supplies set the overall power envelope; sustained full CPU utilisation can reach that limit before thermal throttling occurs.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
HPE
HPE P22020B21 2U Cable Management Arm for DL38X Gen10 Plus Rail Kit
$52.99$67.99−22%
0.00067832BTC
In stock
Lenovo
Lenovo ThinkSystem ST250 V3 7DCEA01YNA Tower Server Xeon E-2434 16 GB RAM
$1,267.99
0.01623152BTC
In stock