We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver 2U rack server front panel with four 3.5-inch drive bays

HPE

HPE DL380 Gen9 4LFF 2x Xeon E5-2620 v4 384GB DDR4 rack server

SKU CH-GPT6-Z8D10

A dual-socket rack server with 384 GB DDR4 ECC memory, two Xeon E5-2620 v4 CPUs at 2.1 GHz, a P440 SAS controller and four 3.5-inch drive bays

  • TypeRack
  • CPU TypeIntel Xeon
  • CPU Speed2.1GHz
  • # of Processors Installed2
  • MAX Processors2
  • Installed Memory Size384GB
  • Dual Xeon E5-2620 v4 processors provide high multi-threaded performance
  • 384GB DDR4 ECC registered memory supports large virtualised workloads
  • Four 3.5-inch LFF drive bays allow flexible SATA or SAS storage capacity
  • HPE Smart Array P440 controller enables hardware RAID for data protection
  • HPE iLO Advanced remote management gives full out-of-band server control

HPE DL380 Gen9 4LFF dual Xeon server

The HPE DL380 Gen9 4LFF rack server arrives with two Intel Xeon E5-2620 v4 processors running at 2.1 GHz and 384 GB of DDR4 ECC registered memory. It uses a P440 SAS controller to manage up to four 3.5-inch drive bays and includes dual 500 W power supplies plus iLO remote management.

Suited for memory-heavy workloads

This configuration suits virtualisation hosts, database nodes or compute clusters that need a large DDR4 footprint and dual-socket performance in a 2U form factor. Buyers who require installed drives, GPU acceleration or more than four 3.5-inch bays should look at other configurations because this unit ships without storage and uses only integrated graphics.

384 GB DDR4 ECC registered memory

The installed 384 GB of DDR4 ECC registered memory is the decisive specification; it determines whether the server can hold your working set without swapping. The chassis supports a maximum of 3 TB, so larger datasets can be accommodated by adding modules later.

Highlights

  • Dual Xeon E5-2620 v4 processors provide high multi-threaded performance
  • 384GB DDR4 ECC registered memory supports large virtualised workloads
  • Four 3.5-inch LFF drive bays allow flexible SATA or SAS storage capacity
  • HPE Smart Array P440 controller enables hardware RAID for data protection
  • HPE iLO Advanced remote management gives full out-of-band server control

Specifications

BrandHP
SeriesProLiant
ModelRack Mount
TypeRack
CPU TypeIntel Xeon
CPU Speed2.1GHz
# of Processors Installed2
MAX Processors2
Installed Memory Size384GB
Memory TypeDDR4
Max Memory Capacity3TB
Hard Drive (Installed)2,00
Storage ControllerHPE Smart Array P440 SAS Controller
HDD InterfaceSATA
GPU TypeIntegrated Graphics
Remote ManagementHPE iLO Advanced
Dimensions36 x 24 x 10 in
Weight40

Questions about this item

What rack depth does the 36-inch chassis need for the sliding rails?

The unit measures 36 inches deep, so the rack must provide at least 36 inches of usable depth for the rails to extend fully.

How are the two Xeon E5-2620 v4 processors seated, and which step is often missed?

Both CPUs are pre-installed in the dual-socket board; the step people skip is confirming the firmware revision matches the 2.1GHz microcode before first boot.

When will the 384GB DDR4 ECC registered memory need replacement?

DDR4 ECC registered modules typically run for years; plan replacement only if diagnostics report correctable errors or capacity must grow toward the 3TB maximum.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.