HPE
HPE DL380 Gen9 4LFF 2x Xeon E5-2640 v4 512GB DDR4 rack server
Rack-mount server with two 2.4 GHz Xeon E5-2640 v4 processors, 512 GB DDR4 ECC memory, P440 SAS RAID controller and four 3.5-inch drive bays
- TypeRack
- CPU TypeIntel Xeon
- CPU Speed2.4GHz
- # of Processors Installed2
- MAX Processors2
- Installed Memory Size512GB
- Dual Xeon E5-2640 v4 processors provide 10 cores each at 2.4GHz
- 512GB DDR4 ECC registered memory supports large workloads
- HPE Smart Array P440 SAS controller manages storage arrays
- 4 LFF 3.5-inch drive bays allow flexible capacity
- HPE iLO Advanced enables remote server management
HPE DL380 Gen9 4LFF dual Xeon server
The HPE DL380 Gen9 4LFF chassis holds two Intel Xeon E5-2640 v4 processors running at 2.4 GHz with ten cores each and 25 MB cache. It ships with 512 GB of DDR4 ECC registered memory and a Smart Array P440 SAS controller supporting SATA drives. Remote management is provided by HPE iLO Advanced and dual 500 W power supplies are installed.
Who this suits and who should look elsewhere
This configuration suits workloads that need high core counts and large memory capacity in a 2U rack form factor such as virtualization hosts, database servers or compute clusters. Buyers who need internal solid-state storage bays or dedicated graphics processing should evaluate other platforms.
The specification that decides fit
The system maxes out at 3 TB of DDR4 across 24 slots so the installed 512 GB leaves room to grow; if your application demands more than 3 TB total memory this chassis cannot meet that requirement.
Highlights
- Dual Xeon E5-2640 v4 processors provide 10 cores each at 2.4GHz
- 512GB DDR4 ECC registered memory supports large workloads
- HPE Smart Array P440 SAS controller manages storage arrays
- 4 LFF 3.5-inch drive bays allow flexible capacity
- HPE iLO Advanced enables remote server management
Specifications
| Brand | HP |
|---|---|
| Series | ProLiant |
| Model | Rack Mount |
| Type | Rack |
| CPU Type | Intel Xeon |
| CPU Speed | 2.4GHz |
| # of Processors Installed | 2 |
| MAX Processors | 2 |
| Installed Memory Size | 512GB |
| Memory Type | DDR4 |
| Max Memory Capacity | 3TB |
| Hard Drive (Installed) | 16,00 |
| Storage Controller | HPE Smart Array P440 SAS Controller |
| HDD Interface | SATA |
| GPU Type | Integrated Graphics |
| Remote Management | HPE iLO Advanced |
| Dimensions | 36 x 24 x 10 in |
| Weight | 40 |
Questions about this item
How do I install the Xeon E5-2640 v4 processors in the DL380 Gen9, and what step is often missed?
Seat both processors in their sockets, apply the supplied thermal compound evenly, then torque the heatsink screws in a diagonal pattern to the specified value; skipping the torque sequence causes uneven pressure and thermal throttling.
Which components in this 512GB DDR4 configuration will need replacement first under continuous operation?
The two 500W Flex Slot power supplies and system fans are the primary field-replaceable units; DDR4 ECC registered DIMMs and the P440 SAS controller rarely fail if airflow stays clean.
What thermal or power limit appears first when the dual 2.4GHz 10-core CPUs run sustained workloads?
The 500W power supply rating caps total system draw before CPU thermal limits engage, so prolonged full-load compute tasks will hit the power budget first.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



