We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

HPE

HPE DL380 Gen9 8SFF 2x Xeon E5-2698 v4 512GB DDR4 rack server

SKU CH-9Q4K-AGBW9

A 2U rack server with two 20-core Xeon processors at 2.2 GHz, 512 GB DDR4 memory, eight 2.5-inch drive bays and a P440 SAS controller

  • TypeRack
  • CPU TypeIntel Xeon
  • CPU Speed2.2GHz
  • # of Processors Installed2
  • MAX Processors2
  • Installed Memory Size512GB
  • Dual Xeon E5-2698 v4 deliver 40 cores at 2.2 GHz
  • 512 GB DDR4 ECC registered memory supports large workloads
  • Eight 2.5-inch drive bays with P440 SAS controller enable flexible storage
  • Dual 500 W flex-slot power supplies provide redundancy
  • iLO Advanced remote management allows full out-of-band control

HPE DL380 Gen9 8SFF dual Xeon server

The HPE ProLiant DL380 Gen9 rack server ships with two Intel Xeon E5-2698 v4 processors running at 2.2 GHz, delivering 20 cores per socket and 50 MB cache each. It is populated with 512 GB of DDR4 ECC registered memory and includes an HPE Smart Array P440 SAS controller plus Intel I350/X540 network adapters providing two 10 GbE and two 1 GbE ports. The 8SFF chassis accepts up to eight 2.5-inch SATA drives, though none are installed.

Ideal for virtualisation clusters

This configuration suits teams that need high core counts and large memory capacity in a 2U form factor with redundant 500 W power supplies and iLO remote management. Buyers who require pre-installed storage, GPU compute, or a newer CPU architecture should consider alternative platforms.

512 GB DDR4 ECC registered memory

The installed 512 GB DDR4 ECC registered memory is the decisive specification; it determines whether the server can hold your working datasets without swapping. The system supports up to 3 TB total, so the existing capacity either meets the requirement or signals the need for additional DIMMs.

Highlights

  • Dual Xeon E5-2698 v4 deliver 40 cores at 2.2 GHz
  • 512 GB DDR4 ECC registered memory supports large workloads
  • Eight 2.5-inch drive bays with P440 SAS controller enable flexible storage
  • Dual 500 W flex-slot power supplies provide redundancy
  • iLO Advanced remote management allows full out-of-band control

Specifications

BrandHP
SeriesProLiant
ModelRack Mount
TypeRack
CPU TypeIntel Xeon
CPU Speed2.2GHz
# of Processors Installed2
MAX Processors2
Installed Memory Size512GB
Memory TypeDDR4
Max Memory Capacity3TB
Hard Drive (Installed)7,68
Storage ControllerHPE Smart Array P440 SAS Controller
HDD InterfaceSATA
GPU TypeIntegrated Graphics
Remote ManagementHPE iLO Advanced
Dimensions36 x 24 x 10 in
Weight40

Questions about this item

How do I install the HPE Smart Array P440 SAS Controller and which step is often missed?

Seat the P440 PCIe SAS Controller firmly in its PCIe slot, connect the SAS cables to the 8 SFF backplane, then enable the controller in UEFI/BIOS — the step most often missed is creating the logical drive in the Smart Storage Administrator before installing the OS.

What maintenance will the 512GB DDR4 ECC Registered memory need later?

DDR4 ECC Registered DIMMs require no scheduled replacement; run the built-in memory test via iLO after any firmware update and reseat modules only if correctable error counts rise above threshold.

At what point does the 2x 500W Flex Slot power supply become the limit under sustained load?

With dual 500W supplies the shared output caps at 500W; sustained draw above that — for example both 20-core Xeon E5-2698 v4 CPUs at full turbo plus a full complement of 2.5" drives — will trigger throttling or shutdown.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.