HPE
HPE DL560 Gen9 8SFF rack server 4x Xeon E5-4650 v4 128GB DDR4
Rack server with four 2.2 GHz Xeon processors and 128 GB DDR4 memory, supporting up to eight 2.5-inch drives
- TypeRack
- CPU TypeIntel Xeon
- CPU Speed2.2GHz
- # of Processors Installed4
- MAX Processors4
- Installed Memory Size128GB
- Four 14-core Xeon processors deliver 56 threads at 2.2 GHz
- 128 GB DDR4 ECC memory supports demanding virtualization workloads
- Eight 2.5-inch drive bays ready for SATA storage expansion
- Dual 800 W hot-plug power supplies provide redundant power
- HPE iLO Advanced enables remote firmware updates and monitoring
Four-processor Xeon server for dense compute
The HPE ProLiant DL560 Gen9 packs four Intel Xeon E5-4650 v4 processors, each running at 2.2GHz with 14 cores and 35MB cache, into a 2U rack chassis that supports up to eight 2.5-inch drive bays. It ships with 128GB of DDR4 ECC registered memory and can scale to 3TB, making it suited for virtualization hosts, database clusters or high-throughput batch workloads that need many threads in a single rack unit.
Dual 800W hot-plug supplies and integrated iLO
Two 800W Flex Slot hot-plug power supplies provide redundancy while the integrated HPE iLO Advanced remote-management controller lets administrators monitor thermals, power draw and system health without being on site. The 10-inch chassis depth keeps airflow paths short, and the latest firmware is pre-loaded so the platform runs at validated thermal and acoustic targets from first boot.
No drives or RAID card installed.
The unit arrives without storage drives or a dedicated RAID controller, so you choose the exact SATA SSD or HDD mix and the RAID level that matches your capacity and resilience needs. An Intel I350/X540 quad-port network card delivering two 10GbE and two 1GbE links is already fitted, and a rail kit can be added on request to complete the rack installation.
Highlights
- Four 14-core Xeon processors deliver 56 threads at 2.2 GHz
- 128 GB DDR4 ECC memory supports demanding virtualization workloads
- Eight 2.5-inch drive bays ready for SATA storage expansion
- Dual 800 W hot-plug power supplies provide redundant power
- HPE iLO Advanced enables remote firmware updates and monitoring
Specifications
| Brand | HP |
|---|---|
| Series | ProLiant |
| Model | Rack Mount |
| Type | Rack |
| CPU Type | Intel Xeon |
| CPU Speed | 2.2GHz |
| # of Processors Installed | 4 |
| MAX Processors | 4 |
| Installed Memory Size | 128GB |
| Memory Type | DDR4 |
| Max Memory Capacity | 3TB |
| Hard Drive (Installed) | 3.840,00 |
| Storage Controller | Integrated Controller |
| HDD Interface | SATA |
| GPU Type | Integrated Graphics |
| Remote Management | HPE iLO Advanced |
| Dimensions | 36 x 24 x 10 in |
| Weight | 40 |
Questions about this item
How do I install the 2.5" drives into the 8SFF chassis and what step is often missed?
Slide each drive into a bay until the latch clicks, then verify the LED turns green; the step often missed is seating the latch fully so the backplane connector engages.
Which components will need replacement first under continuous operation?
The two 800W hot-plug power supplies and system fans are the primary field-replaceable units that wear over time.
What thermal limit appears first when all 4 Xeon E5-4650 v4 CPUs run at 2.2GHz sustained load?
The chassis airflow limit is reached before CPU throttling, so adequate front-to-rear cooling must be maintained.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
DELL OptiPlex 5070 Micro i5-9500T 16GB DDR4 512GB SSD desktop PC
- Business Desktops &…
- Monitor not included
DELL OPTIPLEX3040*SA desktop PC i5-6500 8GB 500GB Win10 Pro Black
- Slim/Small Form Fac…
- Intel Core i5-6500…
ICY DOCK ToughArmor MB994SP-4S 4-bay 2.5" SAS/SATA rack server
- Rack



