HPE
HPE ML350 Gen10 4LFF 2x Xeon Silver 4210 128GB DDR4 No Drive Rack Server
A rack-mounted server holding four 3.5-inch drive bays with dual Xeon Silver 4210 processors at 2.2GHz, 128GB DDR4 memory, and a Smart Array P408 SAS controller
- TypeRack
- CPU TypeIntel Xeon
- CPU Speed2.2GHz
- # of Processors Installed2
- MAX Processors2
- Installed Memory Size128GB
- Dual 10-core Xeon 4210 CPUs at 2.2GHz deliver 20 threads for demanding workloads
- 128GB DDR4 ECC registered memory supports large datasets and virtualisation
- Smart Array P408 SAS controller enables flexible RAID across four 3.5-inch drive bays
- Dual 500W Flex Slot power supplies provide redundancy for continuous operation
- Integrated Intel I350 and X540 network adapters offer two 10GbE and two 1GbE ports
ProLiant ML350 Gen10 4LFF server
This HPE ProLiant ML350 Gen10 tower server arrives in a 4LFF chassis with two Xeon Silver 4210 processors running at 2.2 GHz. The system provides 10 cores per CPU and 128 GB of DDR4 ECC registered memory. It is built for businesses that need expandable internal storage and dual-processor compute in a rack-mount form factor.
Smart Array P408 controller and networking
The installed Smart Array P408 SAS controller manages up to four 3.5-inch SATA drive bays, while an Intel I350/X540 network card delivers two 10 GbE and two 1 GbE ports. Dual 500 W Flex Slot power supplies and HPE iLO Advanced remote management are included. No drives are installed, so storage capacity must be added separately.
Check power, rails and drive selection
Verify that your rack can accommodate the 36 x 24 x 10 inch dimensions and 40 lb weight before ordering. Confirm the available PDU connectors for the two 500 W supplies and request the optional rail kit if your cabinet requires it. Select compatible 3.5-inch SATA drives to populate the four LFF bays.
Highlights
- Dual 10-core Xeon 4210 CPUs at 2.2GHz deliver 20 threads for demanding workloads
- 128GB DDR4 ECC registered memory supports large datasets and virtualisation
- Smart Array P408 SAS controller enables flexible RAID across four 3.5-inch drive bays
- Dual 500W Flex Slot power supplies provide redundancy for continuous operation
- Integrated Intel I350 and X540 network adapters offer two 10GbE and two 1GbE ports
Specifications
| Brand | HP |
|---|---|
| Series | ProLiant |
| Model | Rack Mount |
| Type | Rack |
| CPU Type | Intel Xeon |
| CPU Speed | 2.2GHz |
| # of Processors Installed | 2 |
| MAX Processors | 2 |
| Installed Memory Size | 128GB |
| Memory Type | DDR4 |
| Max Memory Capacity | 3TB |
| Hard Drive (Installed) | 2,00 |
| Storage Controller | HPE Smart Array P408 SAS Controller |
| HDD Interface | SATA |
| GPU Type | Integrated Graphics |
| Remote Management | HPE iLO Advanced |
| Dimensions | 36 x 24 x 10 in |
| Weight | 40 |
Questions about this item
When will the 500 W Flex Slot power supplies need replacement under continuous load?
The two 500 W Flex Slot units are hot-swappable; replace a module when iLO Advanced reports a fault or efficiency drops below the server’s power budget.
Which component hits its ceiling first during sustained 2.2 GHz operation on both Xeon Silver 4210 CPUs?
Thermal limits of the 36 x 24 x 10 in chassis typically throttle the 10-core processors before the 3 TB DDR4 memory ceiling is reached.
How loud and hot does the ML350 Gen10 run with both 500 W supplies and dual 4210 CPUs active 24/7?
Dual 500 W Flex Slot PSUs and two 2.2 GHz Xeons keep fan speeds moderate; iLO Advanced logs show inlet temperatures staying within ASHRAE A2 range during all-day workloads.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



