We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

HPE

HPE ML350 Gen10 8SFF 2x Xeon Platinum 8260L 384GB DDR4 rack server

SKU CH-6NZX-78MAW

Rack server with two 24-core Xeon Platinum 8260L processors at 2.4GHz, 384GB DDR4 ECC memory, Smart Array P408 SAS controller, dual 10GbE and 1GbE networking.

  • TypeRack
  • CPU TypeIntel Xeon
  • CPU Speed2.4GHz
  • # of Processors Installed2
  • MAX Processors2
  • Installed Memory Size384GB
  • Dual Xeon Platinum 8260L processors deliver 24 cores each for heavy workloads
  • 384GB DDR4 ECC registered memory supports large datasets
  • HPE Smart Array P408 SAS controller manages up to 8 drive bays
  • Dual 500W Flex Slot power supplies provide redundancy
  • HPE iLO Advanced enables remote server management

HPE ML350 Gen10 8SFF dual Xeon server

This HPE ProLiant ML350 Gen10 rack server ships with two Intel Xeon Platinum 8260L processors at 2.4GHz and 384GB of DDR4 ECC registered memory. The 8SFF chassis supports up to eight 2.5-inch SAS drives via the included Smart Array P408 controller. Integrated graphics and HPE iLO Advanced remote management are standard.

Suited for virtualization hosts

Buyers who need installed storage drives should look elsewhere because this unit ships without drives. The configuration is fixed at the maximum of two processors so no further CPU expansion is possible. Workloads requiring GPU acceleration beyond integrated graphics are not addressed by this specification.

384GB DDR4 ECC registered memory installed

The system arrives with 384GB of DDR4 ECC registered RAM populated across the memory slots. This capacity determines how many virtual machines or how large a dataset can reside in memory before paging to disk. DDR4 is the only memory generation supported; other DDR types are physically incompatible.

Highlights

  • Dual Xeon Platinum 8260L processors deliver 24 cores each for heavy workloads
  • 384GB DDR4 ECC registered memory supports large datasets
  • HPE Smart Array P408 SAS controller manages up to 8 drive bays
  • Dual 500W Flex Slot power supplies provide redundancy
  • HPE iLO Advanced enables remote server management

Specifications

BrandHP
SeriesProLiant
ModelRack Mount
TypeRack
CPU TypeIntel Xeon
CPU Speed2.4GHz
# of Processors Installed2
MAX Processors2
Installed Memory Size384GB
Memory TypeDDR4
Max Memory Capacity3TB
Hard Drive (Installed)7,20
Storage ControllerHPE Smart Array P408 SAS Controller
HDD InterfaceSAS
GPU TypeIntegrated Graphics
Remote ManagementHPE iLO Advanced
Dimensions36 x 24 x 10 in
Weight40

Questions about this item

Do I need to supply my own 2.5" SAS drives to use the eight front bays?

Yes, the chassis provides eight 2.5-inch SAS bays but no drives are installed; you must add compatible SAS SSDs or HDDs.

Will the Smart Array P408 controller recognise older SAS drives I already own?

The P408 supports standard SAS protocols, so existing SAS drives that meet the controller's firmware requirements will be detected and can be configured in RAID.

How can I confirm both Xeon Platinum 8260L processors and all 384 GB of DDR4 ECC memory are active after first boot?

Check the iLO Advanced web interface or POST screen; both will show two 24-core CPUs at 2.4 GHz and the full 384 GB registered memory count.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.