We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
HPE 1.92 TB SATA 2.5 inch internal SSD with drive carrier

HPE

HPE P05314-001 1.92 TB SATA 2.5" internal hard drive

SKU CH-3KRD-DRNFJ

A 1.92 TB SATA solid-state drive in a 2.5-inch form factor with a carrier, built for read-intensive server workloads

  • 92 TB capacity stores large datasets
  • Read-intensive endurance suits server workloads
  • 5-inch SFF fits dense ProLiant bays
  • SATA interface integrates with existing HPE arrays
  • Included carrier simplifies hot-swap installation

HPE 1.92 TB SATA SSD for server blades

This HPE solid-state drive delivers 1.92 TB of storage in a 2.5-inch form factor with a SATA interface. It is built for read-intensive workloads in compatible HPE ProLiant and SimpliVity servers. The drive includes a carrier for direct installation into supported drive bays. It carries RoHS environmental certification.

SATA interface limits throughput to 6 Gb/s

The SATA connection caps maximum sequential transfer rates at the interface ceiling of 6 Gb/s. This ceiling applies regardless of the drive's internal capability. Servers requiring higher bandwidth need a different interface technology not provided by this model. The drive does not support wireless communication.

Read-intensive endurance rating defines suitability

The endurance type is rated as read intensive, meaning the drive is optimised for workloads with a high ratio of reads to writes. Write-heavy applications such as logging, caching or database journaling will exceed the design target. Buyers needing higher write endurance should select a drive with a different endurance rating.

Highlights

  • 92 TB capacity stores large datasets
  • Read-intensive endurance suits server workloads
  • 5-inch SFF fits dense ProLiant bays
  • SATA interface integrates with existing HPE arrays
  • Included carrier simplifies hot-swap installation

Specifications

BrandHPE

Questions about this item

Should I choose the 1.92 TB SATA model or a different capacity?

This part number is only offered in 1.92 TB. Other capacities would carry a different HPE part number and may not share the same read-intensive firmware or carrier.

What does the 1.92 TB capacity mean once the drive is installed in a server?

The operating system will see roughly 1.92 TB of usable space. The drive is tuned for read-intensive workloads such as boot, logging or content delivery rather than heavy write cycles.

The drive uses a SATA interface — what does that cap in practice?

SATA caps the maximum throughput at 6 Gbit/s, so sequential reads top out around 500 MB/s regardless of the NAND speed. It also means the drive fits standard 2.5" SATA bays in the listed ProLiant and SimpliVity servers.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.