We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver rack-mount server, 1U height, eight 2.5-inch drive bays front, no drives installed

HPE

HPE ProLiant DL360 Gen10 8SFF 2x Xeon Bronze 3104 1.5TB DDR4 No Drive

SKU CH-167D-FF72W

A 1U rack server with two Xeon Bronze 3104 processors, 1.5TB DDR4 memory, a Smart Array P408 controller and eight 2.5-inch drive bays

  • TypeRack
  • CPU TypeIntel Xeon
  • CPU Speed1.7GHz
  • # of Processors Installed2
  • MAX Processors2
  • Installed Memory Size1.5TB
  • Dual Xeon Bronze 3104 processors at 1.7GHz for multi-threaded performance
  • 5TB DDR4 ECC registered memory supports large datasets
  • 8SFF chassis with Smart Array P408 SAS controller for flexible storage
  • HPE iLO Advanced remote management enables lights-out administration
  • 2x 500W Flex Slot power supplies provide redundancy

Ready-to-deploy rack server

The HPE ProLiant DL360 Gen10 is a 1U rack-mount system pre-configured with two Intel Xeon Bronze 3104 processors running at 1.7GHz. It arrives with 1.5TB of DDR4 ECC registered memory installed across its DIMM slots. An HPE Smart Array P408 SAS controller manages storage through eight 2.5-inch SATA drive bays. Dual 500W Flex Slot power supplies and HPE iLO remote management are included.

Suits memory-heavy workloads.

This configuration targets virtualization hosts, database caches and analytics platforms that benefit from very large memory capacity per socket. The six-core Bronze 3104 CPUs operate at a base 1.7GHz without Turbo Boost, so the system is not suited to workloads that rely on high single-thread clock speeds. Buyers who need more than two processors or faster per-core performance should evaluate other platforms.

1.5TB DDR4 memory installed

The defining specification is the 1.5TB of DDR4 ECC registered RAM already populated, reaching half the 3TB maximum capacity of the platform. This volume of memory is the primary value driver for consolidation or in-memory processing tasks. Confirm that your application licences and operating system editions support this memory footprint before purchase.

Highlights

  • Dual Xeon Bronze 3104 processors at 1.7GHz for multi-threaded performance
  • 5TB DDR4 ECC registered memory supports large datasets
  • 8SFF chassis with Smart Array P408 SAS controller for flexible storage
  • HPE iLO Advanced remote management enables lights-out administration
  • 2x 500W Flex Slot power supplies provide redundancy

Specifications

BrandHP
SeriesProLiant
ModelRack Mount
TypeRack
CPU TypeIntel Xeon
CPU Speed1.7GHz
# of Processors Installed2
MAX Processors2
Installed Memory Size1.5TB
Memory TypeDDR4
Max Memory Capacity3TB
Hard Drive (Installed)16,00
Storage ControllerHPE Smart Array P408 SAS Controller
HDD InterfaceSATA
GPU TypeIntegrated Graphics
Remote ManagementHPE iLO Advanced
Dimensions36 x 24 x 10 in
Weight40

Questions about this item

What rack depth and width does the 36 x 24 x 10 in chassis require?

The unit occupies a standard 1U rack space measuring 36 inches deep, 24 inches wide and 10 inches high.

How are the two Xeon Bronze 3104 processors and 1.5TB DDR4 memory installed, and what step is often missed?

Both CPUs are pre‑seated on the system board; the 1536GB of DDR4 ECC registered memory fills the DIMM slots — verify each module clicks fully home to avoid boot errors.

When will the Smart Array P408 controller cache module need replacement?

The flash‑backed write cache on the P408 controller typically lasts several years; replace it when iLO reports a degraded cache health status.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.