We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver 1U rack server, eight front drive bays, two power supplies, rails attached

HPE

HPE ProLiant DL360 Gen10 8SFF 2x Xeon Silver 4110 768GB DDR4 rack server

SKU CH-87CY-TRE4S

Dual 2.1 GHz Xeon Silver 4110 processors with 768 GB DDR4 ECC memory and Smart Array P408 SAS controller in an 8-bay 2.5" rack chassis

  • TypeRack
  • CPU TypeIntel Xeon
  • CPU Speed2.1GHz
  • # of Processors Installed2
  • MAX Processors2
  • Installed Memory Size768GB
  • Dual Xeon Silver 4110 processors provide 2.1 GHz performance for demanding workloads
  • 768 GB DDR4 ECC registered memory supports large datasets and virtualization
  • HPE Smart Array P408 SAS controller enables flexible RAID storage configurations
  • 8 SFF drive bays accept 2.5 inch SAS drives for high-density capacity
  • HPE iLO Advanced remote management simplifies server monitoring and maintenance

Dense Compute Platform

This 1U rack server delivers dual Intel Xeon Silver 4110 processors at 2.1GHz with 768GB of DDR4 ECC registered memory. Eight 2.5-inch drive bays connect through an HPE Smart Array P408 SAS controller. Dual 500W Flex Slot supplies and HPE iLO Advanced remote management complete the chassis.

Suited Workloads and Limits

The 768GB memory capacity fits virtualisation clusters, in-memory databases and heavy multi-threaded tasks. Buyers who need more storage bays, GPU acceleration or a different CPU core count should look at other platforms. The fixed two-processor maximum means the system cannot scale beyond the installed sockets.

Deciding Specification

The installed 768GB DDR4 ECC registered memory is the single figure that determines fit. If the workload requires less capacity, a smaller configuration reduces cost. If it demands more than the 3TB ceiling, this chassis cannot satisfy the requirement.

Highlights

  • Dual Xeon Silver 4110 processors provide 2.1 GHz performance for demanding workloads
  • 768 GB DDR4 ECC registered memory supports large datasets and virtualization
  • HPE Smart Array P408 SAS controller enables flexible RAID storage configurations
  • 8 SFF drive bays accept 2.5 inch SAS drives for high-density capacity
  • HPE iLO Advanced remote management simplifies server monitoring and maintenance

Specifications

BrandHP
SeriesProLiant
ModelRack Mount
TypeRack
CPU TypeIntel Xeon
CPU Speed2.1GHz
# of Processors Installed2
MAX Processors2
Installed Memory Size768GB
Memory TypeDDR4
Max Memory Capacity3TB
Hard Drive (Installed)9,60
Storage ControllerHPE Smart Array P408 SAS Controller
HDD InterfaceSAS
GPU TypeIntegrated Graphics
Remote ManagementHPE iLO Advanced
Dimensions36 x 24 x 10 in
Weight40

Questions about this item

How can I confirm the 2x Xeon Silver 4110 CPUs at 2.1GHz and 768GB DDR4 are detected after initial boot?

During POST and in the iLO Advanced interface both processors and the full 768GB of DDR4 ECC registered memory will be reported as present and healthy.

Which components are already installed and which must be sourced separately for this 8SFF chassis?

The server ships with 2x Xeon Silver 4110 CPUs, 768GB DDR4 ECC RAM, Smart Array P408 controller, Intel I350/X540 2x 10GbE + 2x 1GbE network card, and 2x 500W Flex Slot power supplies; 2.5" SAS drives and rail kit are not included.

Should I choose the 8SFF version over a different bay count for this DL360 Gen10?

The 8SFF model supports up to eight 2.5" SAS drives and matches the installed P408 controller; select it when you need maximum drive density in a 1U rack form factor.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.