HPE
HPE ProLiant DL360 Gen11 1U rack server, Dual Xeon 4410y 12-core 2.00GHz, 1TB DDR5, 61.44TB SAS SSD
A 1U rack server with dual 12-core Xeon 4410y processors, 1TB DDR5 memory and 61.44TB SAS SSD storage, Windows Server 2025 Standard licence included
- TypeRack
- CPU TypeIntel Xeon
- MAX Processors2
- Memory TypeDDR5
- Max Memory Capacity1TB
- Dual Xeon 4410y 12-core CPUs provide up to 3.90 GHz turbo performance
- 1TB DDR5-4800 ECC memory across 16 modules supports large virtualised workloads
- 44TB enterprise SAS SSD storage in eight 7.68TB drives delivers high-capacity speed
- 1U rack form factor with redundant power supplies fits dense data-centre deployments
- iLO 6 remote management with Intelligent Provisioning simplifies server administration
Compact 1U rack server for virtualized workloads
The HPE ProLiant DL360 Gen11 is a 1U rack server built for hybrid environments that need dense compute and fast storage. It ships with dual Xeon Silver 4410y processors, each delivering 12 cores at 2.00 GHz with a 3.90 GHz turbo ceiling. Sixteen 64 GB DDR5-4800 ECC buffered modules provide 1 TB of memory capacity. Eight 7.68 TB enterprise SAS 12Gb/s SSDs yield 61.44 TB of raw flash storage. A Windows Server 2025 Standard licence for 16 cores is included.
Redundant power and remote management for steady
Dual redundant power supplies keep the platform running through a single-module failure. The embedded four-port 1 GbE OCP 3.0 adapter handles baseline connectivity without extra cards. HPE iLO 6 with Intelligent Provisioning gives administrators full remote control over power, boot media and hardware health from any browser. The MR408i-o Gen11 storage controller uses four gigabytes of cache and eight PCIe lanes to sustain SSD throughput under sustained write loads.
Rail kit included; memory
The bundled rail kit lets the 1U chassis slide into standard racks without extra hardware. Memory modules and SSDs ship separately and must be installed before first boot, so plan time for population and RAID configuration. PCIe Gen5 slots remain available for additional network or accelerator cards if the workload grows. The OCP 3.0 form factor keeps the front mezzanine free for future storage controller upgrades.
Highlights
- Dual Xeon 4410y 12-core CPUs provide up to 3.90 GHz turbo performance
- 1TB DDR5-4800 ECC memory across 16 modules supports large virtualised workloads
- 44TB enterprise SAS SSD storage in eight 7.68TB drives delivers high-capacity speed
- 1U rack form factor with redundant power supplies fits dense data-centre deployments
- iLO 6 remote management with Intelligent Provisioning simplifies server administration
Specifications
| Type | Rack |
|---|---|
| CPU Type | Intel Xeon |
| MAX Processors | 2 |
| Memory Type | DDR5 |
| Max Memory Capacity | 1TB |
Questions about this item
How do I install the 16 DDR5 modules and 8 SAS SSDs that ship separately?
Power down the 1U chassis, open the top cover, populate all 16 DIMM slots with the 64GB DDR5-4800 modules following the socket sequence on the air baffle, then mount each 7.68TB 2.5" SAS SSD into the front drive bays and connect them to the MR408i-o controller.
Which components will need replacement first during long-term operation?
The redundant power supplies and cooling fans are the primary field-replaceable units; the 8 enterprise SAS SSDs carry a finite write endurance rating, so plan drive swaps once their SMART media-wear indicator approaches the threshold.
What thermal or power limit appears first when both Xeon 4410y CPUs run at 3.90 GHz turbo continuously?
The 1U form factor constrains airflow, so sustained all-core turbo on the dual 12-core processors will hit the chassis thermal envelope before the redundant power supplies reach their rated output.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



